Normally when I need an 'eye' termination on a piece of flex, I would use standard insulated crimp on terminals. In this instance the standard range of eye crimp-on terminals are too small. I need to add terminations to an item to be connected across a 12V (car type) battery. This requires 'eyes' that will fit 10mm studs on the battery connectors. I can find uninsulated crimps that will suit 10mm studs, but these are for 75mm cable, the cable size I want to collect is less than
1.5mm i.e. Red insulated connectors would suit.
Anyone aware of crimp on large Diam eyes, that suit small cables.