Home Repair

76594 Threads Posts
to

Can I Replace All My Fuses WIth Time Delay Fuses?

The odd time when I do a renovation I large power tool blows a fuse on start up. Given that Time delay fuses are the sa...
16 comments posted 20yrs
posted by matt_milligan2
16 comments posted 20yrs posted by matt_milligan2

Lighting Question

I just purchased a picture light. It is one of those fancy lights that is installed over a piece of artwork, and it the...
33 comments posted 20yrs
posted by basinnospam
33 comments posted 20yrs posted by basinnospam

Valves on old radiators

I have hot-water heat with an old (probably 80 year old) system. The radiators are the big old fashioned kind. I am try...
5 comments posted 20yrs
posted by heathcliff_bambino
5 comments posted 20yrs posted by heathcliff_bambino

Stanley Bostitch BT35 trigger valve assembly

The trigger valve assembly in my BT35 (N.B. not BT35B) brad nailer has failed (it's not the external O-rings). The...
0 comments posted 20yrs
posted by ddl
0 comments posted 20yrs posted by ddl

FNTP - FIP adapter?

Does an adapter exist that goes from 1/4 FNTP (Pressure Regulator) to 3/8 compression type fitting (small end of faucet...
2 comments posted 20yrs
posted by me7
2 comments posted 20yrs posted by me7

Crack in microwave

I have a small crack on the floor of my microwave oven. Should I discontinue use? Will the microwaves be able to escape...
15 comments posted 20yrs
posted by coreyleiper
15 comments posted 20yrs posted by coreyleiper

Sump Check valve question

Hello, Is a check valve necessary for a sump pump installation? . I have about 8 ft - 1 1/2" pvc pump coming up out of...
3 comments posted 20yrs
posted by jack
3 comments posted 20yrs posted by jack

Drainage solution

Here's how one home builder did it while overcoming deed restrictions on building height (called a "twofer"). http:/...
0 comments posted 20yrs
posted by heybubNOSPAM
0 comments posted 20yrs posted by heybubNOSPAM

Ground wire to water pipes

Now that I've had proper grounding installed in my breaker box, and have had my hot, cold, and gas pipes bonded to...
6 comments posted 20yrs
posted by m44_master
6 comments posted 20yrs posted by m44_master

Deck surfacing question

A few weeks ago I was pressure washing my back deck which, due to various remodeling projects had become a real mess. I...
8 comments posted 20yrs
posted by jamie
8 comments posted 20yrs posted by jamie

Extended warranties - worth it?

This is a companion to my other thread about Kenmore vs. Whirlpool washers, where I also posted this question: What do...
28 comments posted 20yrs
posted by aspasia
28 comments posted 20yrs posted by aspasia

Mold removal in basement - remove all the stains?

My basement has some mold growing on the walls. It's not too bad, only in one area where the water pump sits. I don...
7 comments posted 20yrs
posted by baspluim
7 comments posted 20yrs posted by baspluim

attic exploration

The days are cooling off and it's time to brave the tight confines of my attic. There's almost no floor and I don't thi...
13 comments posted 20yrs
posted by crabshell
13 comments posted 20yrs posted by crabshell

heater and air conditioner problems

Hello, I would really like some answers! I'm a new homeowner and our furnace/AC unit has an installation date of 19...
2 comments posted 20yrs
posted by Reneejane
2 comments posted 20yrs posted by Reneejane