I have a 48 inch width between two walls with a current 48" vanity. The vanity fits very snug.
On top, there is a cultured marble top, but it appears to only be about
Any new vanity tops i see only come in 49 inch versions (to allow a little overhang).
However, 49 inches wont fit between the walls unless i cut into the sheetrock on each side.
Any ideas? Do you think the previous owner actually cut the old vanity top to make it fit?
Sounds like he bought a custom-made marble top, which is probably what you'll have to do. Or, you could cut down a 49" top. If you intend to caulk around the top where it meets the walls, you should be able to hide any cut marks. If it's got a backsplash, then things get interesting, and maybe you're back to the custom idea.
Notch out the sheet rock; better than cutting that stuff. Cheaper, too.
Same problem here only I found out its 3/8 sheetrock not 1/2"
That would really have to suck.
Did you buy your house from........ Just kidding.
Colbyt
Thats why they make a thing called a concrete saw blade. Or have someone with the proper tools cut it for you.
Of course you could rip down the walls and rebuild them with 2x3's instead of 2x4's, and then you'll have to add a few 1x2's and laths to come out right.
Or, make your own top out of plywood and put some vinyl flooring on it, or ceramic tile.
Then there's one other option...... MOVE !!!!
Have something to add? Share your thoughts — no account required.
Ask the community — no account required