Finally got insulation in the gutted bedroom and the noise drop is unreal

Nov 20, 2026 Last reply: 1 hour ago 6 Replies
Saved reading
Jump to replies (6)

Spent the last three weekends stripping our back bedroom down to the studs. Old walls had literally nothing in them, just plaster over the boards, so I figured while everything's open I might as well do it right. Picked up some rock wool batts and spent a full Saturday cutting and fitting them between every bay. Got the vapor barrier up yesterday and drywall starts this weekend. The part I did not expect was how quiet it allready feels in there. Even with just the bare studs filled in and no drywall on yet, the road noise from out front has basicly vanished. My wife walked in and thougth I'd already closed the walls up. I keep going in there at night just to stand around and enjoy the quiet, wich sounds ridiculous but here we are. Couple things I learned the hard way. Cut the batts a hair oversized so they friction fit and stay put, don't just lay them in loose. And wear real gloves plus long sleeves, that stuff will wreck your arms if you skip it. Also ended up filling around the window rough openings with offcuts jammed in tight, which felt fiddly at the time but I'm glad I bothered. Anyway, if you've got a room opened up and you're on the fence about doing it, just do it. Wish I'd done this years ago instead of living with a bedroom that echoed like a garage.


Did something similar with our bedroom a couple years back, except mine was blown cellulose into closed walls. Had a guy drill two small holes per cavity from outside, filled everthing up, patched the holes. The difference on the highway side of the house was obvious the same week. My kids sleep through garbage truck mornings now, which they never managed before. Funny thing is the quiet snuck up on me too. I kept assuming it was in my head til a delivery driver knocked and my dog didn't even bother barking. That dog barks at leaves. One thing I'd add from my own redo, the ceiling matters more than you'd think. Road and neighbor noise comes down through the attic joists a lot of the time, and I only figured that out after doing the walls and still hearing the upstairs TV through my office ceiling. Blowing a thick layer up in the attic killed that last bit of bleed. Also agree on the gloves thing, except I'd say respirator too. I spent one afternoon fitting fiberglass around some ductwork in shorts and paid for it with itchy shins for two days. Learned my lesson and bought a cheap pair of coveralls I keep just for insulation jobs now.

I did rock wool in my son's room about four years ago when we gutted it after a plumbing leak, and I'll add one thing the batts alone didn't solve for me. The noise coming thru was mostly the shared wall with the kitchen, and even packed full the sound still found a path through the outlets and the top plate. What actualy finished the job was putting up a second layer of drywall on that one wall with green glue between the sheets. Night and day difference compared to insulation by itself.

The other thing I'd flag is the electrical boxes. Every cutout is a hole in your sound barrier, and my electrician just chopped big rectangles where the old boxes were. I went back with putty pads around each one before the drywall went on and I'm convinced it mattered more than the offcuts around my window did.

Also on the fitting, I found the friction fit worked great in the middle of the wall but sagged over time in the ceiling bays. Had one batt slowly working itself down into the light fixture opening over a year. A few dabs of construction adhesive on the joist faces sorted that out and it's stayed put since.

The bit about the noise sneaking up on you is spot on, I kept going into our spare room during a reno just to hear the difference too. Wanted to back up the point about adding that second drywall layer though. I did exactly that on the wall shared with our furnace closet and it cut the hum way down, but the last piece of the puzzle was swapping the hollow bedroom door for a solid core one. Sound was coming straight through that cheap door the whole time and I never connected it until I stood in the hallway with the room sealed up.

Enjoy it while the stud walls are the quiet part, beacuse drywall is alot thinner than people think when it comes to sound. In our old place I packed every cavity the same way back in the nineties, and the one spot that still let traffic through was the window itself. Single pane, old sash, the wall did its job and the glass just hummed along anyway. Once we got storm windows on the outside the room finally went proper quiet. So while it is open, run your hand around the rough opening on a windy day and feel for drafts before you button it up.

First time posting here so hope this is the right thread. I did a similar thing last year but in a converted garage office, and honestly the batts made way less difference than I expected. Turns out my biggest leak was the big garage door itself, all that foam panel stuff lets sound straight through. Once I framed a normal insulated wall with a window in front of it the room finally went quiet. So if anyone's doing this, worth thinking about what the actual weak spot is before you blame the walls. Anyway, question for the OP if you see this, does the vapor barrier do anything for sound or is it purely a moisture thing? I skipped mine in the garage since it's not a living space originally and now I'm wondering.

Update: read the bit about sound sneaking through the outlets and went and checked mine with a flashlight. Sure enugh, the boxes on the street side wall have gaps all around them where the vapor barrier got cut. So now I'm wondering, is a bead of acoustical sealant around each box enough, or do I need to do something fancier before the drywall goes up this weekend? Would rather fix it now than open it all again.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required