Latest threads in Installationshow only best voted threads

Subject Author Posted Replies
 
Sliding glass door replacement
Due to a overhang on the outside of my house from a room add on. Can I replace the sliding glass doors from the inside. If so how ?
 
Above oven fan vent through log wall
We are new to a log home and we’re putting in a new oven fan to vent outside(thru log wall not roof) and want to know which tools are the best? My husband was going to drill holes through in a...
 
RCCB fixed now the other side trips
RCCB was tripping at least 3 times a day I couldn't find a fault so I replaced and it seemed to have solved the issues, but 3 days later the RCCB on the other side has tripped, dos anyone have any...
 
Hot water wiring and thermostats
I cleaned the lime out of my electric water heater and installed new elements and thermostats. I followed the wiring diagram when hooking up wiring. I turned the breaker back on and checked voltage....
 
Generator Transfer switch to subpanel instead of main house panel?
Installing a manual transfer switch for our generator to run some lights/outlets in our house. Nothing major. We have a main panel on the side of our house that then feeds to a panel on our garage...
1
1
 
outside motion light sometimes not working
i have a outside garage motion light 100watt bulb...it keeps intermittently not working.. it is brand new. there was a metal cross bracket alreay there, but i needed to also us the cross bracket from...
 
Can you put a dimmer on led rope lights
No further details provided
 
how to wire two singer electric baseboard heaters so they work at the same time
No further details provided
 
can a sunvic sz 2401 actuator (4-wire) be connected to a 2 wire (brown and blue) input?
No further details provided
 
I need wiring diagram for Dewalt 3/8 D21008 Type 1 switch
No further details provided
 
How many 2.5mm and 1.5mm wires can hold in a 20mm cinduit?
No further details provided
 
is square d compatible with a federal pacific panel?
No further details provided
1
1
 
I have a outlet that has 2 hot wires and 2 ground. can I bypass 1 of each
I have a outlet that has two hot wires and two ground wires can I put a wire nut on one of each and bypass them
1
1
 
fan lites black,white,green & black/white stripe, ceiling black,white,green,red?
No further details provided
 
Installing dishwasher with no ground wire
No further details provided