NOTICE:
Just put in a CA storage refrigeration system. Pulled the cap off the refrigerant line, prepared for brazing. Looked inside the tubing and its plugged solid.
Found the factor put TWO plugs in the end! The other was shoved inside the tubing.
So, is this a 'one time' incident or is this a potential major problem of Cero (spelling) having a machine breakdown.
This could have really caused us major problems. Be careful all those who are piping to check if you have a clear pipe.
Rich
ive seen this before, as well .
while back , went on a call , new apartments , we put in the furnaces and gas piping , first tenant in this unit , called cuz she was cold , furnace was underfiring,
checked fuel pressure , would build slowly until the valve would open and then the bottom would fall out , suspected a bad regulator on the gas meter , called the gas co, they come and check it , nothing wrong , unhook the gas pipe from the meter and then from inside the apartment and let it have it with my co2 bottle freakin sandwich bad pops out , guess someone ate their lunch and then put the bag inside the 1" pipe and it got installed , without anyone catching it. pressure test never would have caught this one question remains , was someone being funny or malicious , or was it just pure dumb luck , and someone stuffed it in there without realizing what it would do ?
"Geoman" wrote:
They stuck it in there to keep critters out, before it was hooked up?
dont think so, it still had bread crumbs in it
wrote:
message news:xNCdnSB4lLAIUgnbnZ2dnUVZ snipped-for-privacy@insightbb.com...
Oooops...
Have something to add? Share your thoughts — no account required.
Ask the community — no account required