Fitted a set of 4 halogen lights (all one unit) which I got from B&Q.
Followed instructions for fitting to the letter. At first everything
seemed OK. However find that if the living room light is switched on it
flickers and if the kitchen light is on it can flicker and has gone off.
Everything comes back to normal when either light in living room or
kitchen is switched off and then back on.
Obviously they are on the same circuit but all connections appear
correct and tight any suggestions as to why the problem seems to occur
some of the time but not all the time.
Firstly, are they the low voltage type lights? Where did you take the
supply for the transformer from. Did you use the wiring to the original
light fitting in the ceiling or from somewhere else in the circuit?
Are the new lights the dimmable type? If so, what type of dimmer switch do
you have them on?
So many questions, and not enough information. Can you start by telling us
what wiring configuration you have used, please. Thanks.
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.