Folks,
I need some stainless strip: 800mm by 50mm by 5mm. Can anyone recommend a supplier for such a small quantity?
Ian
PS Whistons of Stockport, RIP.
Folks,
I need some stainless strip: 800mm by 50mm by 5mm. Can anyone recommend a supplier for such a small quantity?
Ian
PS Whistons of Stockport, RIP.
I'd go to the man up the road who welds stuff gates and farm machinery mostly He has plenty of stainless offcuts hanging around Maybe you have a similar man locally?
Anna
-- Anna Kettle Lime plaster repair and conservation Freehand modelling in lime: overmantels, pargeting etc Tel: (+44) 01359 230642 Mob: (+44) 07976 649862 Please look at my website for examples of my work at:
In message , The Real Doctor writes
Plenty of scrap metal merchants in Trafford Park who may be able to help you, alternatively there's quite a few fabricators there and plenty of places that 'make good' on industrial machinery.
Might be worth your while to have a drive around and see if you can strike up a beer/metal interface with one.
Sorry, I should have clearer. I'm not in Stockport ... I'm in the middle of nowhere, and my only local enginering company is an agricultural one who consider using a lump hammer instead of a sledge hammer the height of sophistication ... stainless?
Ian
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.