Latest threads in Woodworking Forumshow only best voted threads

Subject Author Posted Replies
 
motzarella.org not getting rec.norm posts?
I switched to these guys when scumcast bailed on newsgroups. Today I've tried getting posts but I keep being told that there are no new posts. Obviously, this is false. Is anyone else using these...
3
3
 
Router table insert
I'm not the Mike you asked, but that's never stopped me. :-) One issue is sawdust falling down into the router. I have a vac port down there, so I don't worry about it, but it might be a problem for...
36
36
 
DELTA 36-865 Versa Feeder (power feeder) QuestionRockler is putting the Delta 36-865 power feeder on sale this Saturday for $100 - normally about $300. This is the little itty-bitty feeder - only 1/8th hp with a somewhat limited reach - but it weighs 27
Rockler is putting the Delta 36-865 power feeder on sale this Saturday for $100 - normally about $300. This is the little itty-bitty feeder - only 1/8th hp with a somewhat limited reach - but it...
11
11
 
Work Sharp gloat
Sheet of sandpaper $0.50 1/4" float glass $5.00 scrap scott
15
15
 
O/T - 2009
May your new year be filled with good health, sustaining friendships, happiness, good fortune, wisdom, and... ...may your days be filled with sunshine. :)
11
11
 
New Year's Resolution
Get a pair of Croquies available at sporting good stores. Designed for sailors an skiers. When your glasses Cost $500/pair, having them go overboard when you lest expect it is not funny Magee. Lew
9
9
 
Re: Have a prosperous, happy, and safe 2009 and beyond
Robatoy wrote in news:counterfitter- Robatoy, Gelukkig Nieuw Jaar! and Happy, healthy and successful 2009 to all!
1
1
 
What is it? Set 265
Just posted the latest set: http://55tools.blogspot.com/Rob
21
21
 
REVIEW - Kreg Multi-Purpose Push Stick
The day *might* come that I'll run out of 1/4" ply scraps. Putting the ruler on it ensures that it will not be found when needed.
5
5
 
OT - Wishes
It might be more than mortal man deserves, but it's worth a try. May your New Year be as blessed and filled with happiness as mine was last year. HNY, y'all Cretins.
3
3
 
O/T: Here's Hoping
May you all find 2009 to be a vast improvement over 2008. Be safe out there. Lew
6
6
 
Band Saw Blades
Should have purchased your Olsen blades from Coastal Tools, as I had and they're the cheapest I found in Internet. Wonder if there are anyone cheaper? Comparison between Rockler and Coastal Tools
25
25
 
OT Politicaly Correct Seasonal Wishes
Hope Every one had a Merry GIFTmas and To all a Successful Calendar Change!
5
5
 
Looking for a tip to center my forster bit in my mortise
I have to drill out some mortises that are NOT centered in table leg I am working on. That means I can't press the bit down to make a hole and flip the piece to see if the point goes into the hole I...
25
25
 
Using laminates outdoors
Has anyone used laminate (for counter tops) outside? I want to do a couple of projects for outside that don't require laminate, but it is a huge consideration. I'm just wondering how long it would...
6
6