Woodworking Forum

51629 Threads Posts
to

Wide tenon question...

From all my reading I know that a tenon shouldn't be longer (I may be using the wrong dimensional term) than 3 inches....
11 comments posted 22yrs
posted by da
11 comments posted 22yrs posted by da

Ridgid planer

When I feed wood into my Ridgid planer it seems to get 'stuck' halfway through. I usually need to push or pull the wood...
44 comments posted 22yrs
posted by avthokie
44 comments posted 22yrs posted by avthokie

Neander bench for outfeed table

Has anyone built a neander bench at a height to double as an outfeed table? I'm very limited on space and want to combi...
3 comments posted 22yrs
posted by rldp30
3 comments posted 22yrs posted by rldp30

Plywood Thickness questions

I am building a blanket chest. The frame is 3/4" thick, and the panels are 1/2"; the missing 1/4" is on the outside. Is...
2 comments posted 22yrs
posted by toller
2 comments posted 22yrs posted by toller

THIN PLYWOOD

my wife wants me to make her a display tray for some of her needlework.... ok, no problem. she likes the sudberry tray...
5 comments posted 22yrs
posted by warrenrn1
5 comments posted 22yrs posted by warrenrn1

knocking noise on grizzly lathe

I have a grizzly g8691 lathe. It seems to work OK but at higher speeds it produces a knocking noise. I'm going to try a...
2 comments posted 22yrs
posted by wskossack
2 comments posted 22yrs posted by wskossack

Is it necessary to finish raw pine?

Hi, We have just bought some furniture for our kids' bedrooms and it is Scandinavian pine, fairly light coloured & quit...
22 comments posted 22yrs
posted by k.jeffery
22 comments posted 22yrs posted by k.jeffery

WB Urathane Spray Problem

I have been using my Turbinaire HVLP sprayer for about 8 months now and have been quite happy with the results. However...
12 comments posted 22yrs
posted by JGS77Stamp
12 comments posted 22yrs posted by JGS77Stamp

Table Saw Bevel Cut Dangers

As a newbie I have read with interest the various posts on the dangers of bevel saw cuts and have concluded that the po...
18 comments posted 22yrs
posted by steel.jenny
18 comments posted 22yrs posted by steel.jenny

More wisdom sought on benchtop detail

Greetings, I'm thickening the top of my teacher's table with stuff on hand. I'm putting a layer of 5/8 ply across the f...
0 comments posted 22yrs
posted by nospam
0 comments posted 22yrs posted by nospam

Wainscoting Question

Im putting in wainscoting in my second bathroom. Is there a problem with just nailing the wainscoting at the top and bo...
10 comments posted 22yrs
posted by preeves1
10 comments posted 22yrs posted by preeves1

Planing technique question

Greetings, I'm flattening an old schoolteacher's desk with maple top for a workbench. My 4 & 5 plane irons are scary sh...
22 comments posted 22yrs
posted by nospam
22 comments posted 22yrs posted by nospam

Any Smithy Owners?

Looking at purchasing a new Smithy multi-tool machine, probably the Ironwood model. Any Smithy owners out there that co...
0 comments posted 22yrs
posted by paulosullivan
0 comments posted 22yrs posted by paulosullivan

small gloat at Atlanta show

Went to the Atlanta woodworking show yesterday. Very good show. Very well attended. Good, free seminars. Didn't do the...
9 comments posted 22yrs
posted by bobthebuilderyeshecan
9 comments posted 22yrs posted by bobthebuilderyeshecan

OT--The Serious Side of George Carlin

(His wife recently died...) > > Isn't it amazing that George Carlin - gross and > mouthy comedian of the 70's and 80's...
17 comments posted 22yrs
posted by rschmall
17 comments posted 22yrs posted by rschmall