Woodworking Forum

  1. Home
  2. Woodworking Forum
51629 Threads Posts
to

Worth reading in Woodworking Forum

Re: Some advice on table I made..

Oookay, by the looks of it, I can continue my work. Thank you all.
10 comments posted 20yrs
posted by sawaarDELETE
10 comments posted 20yrs posted by sawaarDELETE

Back for a 5x7 picture frame.

I made a picture frame for my wife for mother's day (almost made it...). I can make the back out of 1/8" birch, but tho...
7 comments posted 20yrs
posted by jtpryan
7 comments posted 20yrs posted by jtpryan

Re: 220V Magnetic switch problem

>Hi Doug, > >Thank you very much for your help. The table saw is now working fine. > >It's true, I had my 2 breakers on...
11 comments posted 20yrs
posted by spambait
11 comments posted 20yrs posted by spambait

Online 24hr woodworking show?

Could somebody please post a link to it. ( It was mentioned here a month or so ago) Thanks, Clay
16 comments posted 20yrs
posted by Clay
16 comments posted 20yrs posted by Clay

Re: Covering Nail hole in Melamine Board

> >> Just wondering what you experts recommend for covering brad nail holes >> in teh melamine board > > Where are thes...
5 comments posted 20yrs
posted by George
5 comments posted 20yrs posted by George

Quartz AA Clock Movements Kits

Quartz AA Clock Movements Kits. Scale : 2 1/8" x 2 1/8" square and 1/2". * Poiter is included. Price : $3 See the pictur...
0 comments posted 20yrs
posted by jellycm
0 comments posted 20yrs posted by jellycm

How smooth need a cyclone inner cone be?

I'm designing a cyclone-on-a-budget, and right now leaning toward using some thick walled plastic barrels as the basis....
8 comments posted 20yrs
posted by wseavey
8 comments posted 20yrs posted by wseavey

Cheap, effective 14" bandsaw dust collection

Hi all, I've put up a quick article on rigging up a generic 14" import bandsaw for very effective dust collection that...
13 comments posted 20yrs
posted by vvv
13 comments posted 20yrs posted by vvv

Delta planer knive gauge

I would like any recommendations for a good knive set-up gauge for a 12 inch Delta(Mastercraft) planer. This will be my...
1 comments posted 20yrs
posted by fshepley
1 comments posted 20yrs posted by fshepley

The Appaling Lack Of Mother's Day Threads

I have not read the Wreck carefully in a bit but a modest perusal shows a shocking lack of inquiries concerning appropr...
5 comments posted 20yrs
posted by notme
5 comments posted 20yrs posted by notme

Software - Part III

I finally have everything done on the workbench plans for the software that I wrote. I included 3 CAD drawings in jpg f...
0 comments posted 20yrs
posted by rob
0 comments posted 20yrs posted by rob

Exploding Duct Theory - Redux

I'm getting ready to hard pipe my dryer vent with PVC. I'm fairly confident that wood dust will not explode but I am le...
4 comments posted 20yrs
posted by notme
4 comments posted 20yrs posted by notme

Good source of Sandpaper for Delta Drum Sander

Am looking for a good source of sandpaper for my Delta Drum Sander (31-251X) - Am willing to cut my own if that will de...
3 comments posted 20yrs
posted by NEWSMAN
3 comments posted 20yrs posted by NEWSMAN

Steel Roof Question....

I have a 6 year old steel roof a older home that I purchased last fall....... This spring I noticed that many of the sc...
1 comments posted 20yrs
posted by porte(takout))homme
1 comments posted 20yrs posted by porte(takout))homme

Exciting range of Great Gateways

Relax and enjoy the holidays Explore magical world of hundreds of miracles Go for sunny and sandy Beaches, get wildlife...
0 comments posted 20yrs
posted by anisjoshi
0 comments posted 20yrs posted by anisjoshi