Woodworking Forum

  1. Home
  2. Woodworking Forum
51629 Threads Posts
to

Worth reading in Woodworking Forum

stove

We bought a chimenea stove in Florida for cool nights out on the property. We have since moved to the Syracuse, N.Y., a...
4 comments posted 20yrs
posted by malley0221
4 comments posted 20yrs posted by malley0221

Garage heaters

I live in Ontario Canada and I have a 400 sq foot insulated shop/garage with a natural gas line to my shop. Where can I...
9 comments posted 20yrs
posted by mreynolds4
9 comments posted 20yrs posted by mreynolds4

Glue Creep - Was Bent Lamination

Below is an interesting thread on glue creep. In furniture making or general woodworking I have never experienced glue...
9 comments posted 20yrs
posted by dave
9 comments posted 20yrs posted by dave

How would you make this disc.

Hi, About once a year I make about 200 disc out of MDF. These disc are 3.25 inch in diameter, 1/2" thick with an axial...
13 comments posted 20yrs
posted by haar
13 comments posted 20yrs posted by haar

usedwinebarrels.com

Does anybody know if usedwinebarrels.com is still in business? I've called several times, no answer. I've emailed, no re...
3 comments posted 20yrs
posted by net3431
3 comments posted 20yrs posted by net3431

Doors and Locks problems? Ask Us

At Locksontheweb.com you can ask our professional Locksmith and door installer your technical questions. You will also...
0 comments posted 20yrs
posted by odjud
0 comments posted 20yrs posted by odjud

TableSaw Alignment

On my tablesaw the workpiece tends to drift away from the fence during the cut. I have done the usual checks on alignme...
12 comments posted 20yrs
posted by gus_zernial
12 comments posted 20yrs posted by gus_zernial

Google Sketchup/Router Fence

Has anyone experimented with Sketchup? It's a free 3d modeling tool from google. I've been using it to refine designs b...
5 comments posted 20yrs
posted by todd1814
5 comments posted 20yrs posted by todd1814

AEG Combo

Hi, I have recently acquired an AEG Combination tool set. Planer, sander, jigsaw etc. The only problem I have is that a...
1 comments posted 20yrs
posted by fhobson
1 comments posted 20yrs posted by fhobson

Measuring an Octagon (follow up to post 09/25/06)

Friends, I set a question in August (08/25/06 I think?) about a = workshop/summerhouse I intended building. My query co...
0 comments posted 20yrs
posted by nobody
0 comments posted 20yrs posted by nobody

Those Darn leaking oil bottles

A couple of my nail guns require oil. I cannot keep the little plastic bottles from leaking . What am I doing wrong or w...
12 comments posted 20yrs
posted by jstevens77
12 comments posted 20yrs posted by jstevens77

Mortising doors for mortise locks...

I need to mortise out a door to accept a Baldwin mortise lock. I know that the tolerances are really tight (with errors...
15 comments posted 20yrs
posted by NOSPAM
15 comments posted 20yrs posted by NOSPAM

Forstner Bits

I would like to get the opinion of the group as to who manufacturer's the best forstner bits. I am looking at which the...
6 comments posted 20yrs
posted by thorgold
6 comments posted 20yrs posted by thorgold

Finished the Bathroom

Finally finished the bathroom! More details here http://www.teamcasa.org/workshop/mirrorcab.htmDave
10 comments posted 20yrs
posted by dave
10 comments posted 20yrs posted by dave