What is it? Set 380

This week's set of photos has been posted:

formatting link

Reply to
Rob H.
Loading thread data ...

2194. Baccarat card shoe 2196. A puller for something. Karl
Reply to
kfvorwerk
2192 These look like broaches... Metalworking tools. Like files, but with carefully, and precisely machined teeth. Pulled (or pushed or both) through the workpiece to make controlled-shape interior slots or holes.

2194 Card dealer's shoe. Makes it hard for the dealer to deal seconds or from the bottom. Also makes it harder for the players to see marked cards.

Reply to
Alexander Thesoso

2192 looks llike a plane makers float used to remove wood when cutting out the throat on a wooden hand plane. Could be also a gunsmiths inletting float file. Looks to have a star drill on the end for boring or enlarging holes in wood. 2194 butter mould box for forming butter into blocks 2196 a bearing pusher designed to push a shaft out of a bearing . or an automotive steering tie rod end seperator .
Reply to
Kevin(Bluey)

Card shoe is correct but I don't know if it's specifically for Baccarat.

Nope

Reply to
Rob H.

You're in the right ballpark but not quite correct.

Reply to
Rob H.

2194. Baccarat card shoe 2196. A puller for something.

Karl

========

2196 looks like a special purpose spring compressor (engine valve removal)
Reply to
Dennis #1

The last four words of this answer are correct, though there is a particular name for this type of tool, it's not a float.

It's not a pusher or a separator.

Reply to
Rob H.

2196 is a BFA Blank firing adapter - It clamps the the end of a M16 when firing blanks to force pressure back down the gas tube which operates the bolt to eject and chamber another round.

Clay

Reply to
Clay

It probably is but it would double as a ball joint removal tool.

Reply to
F Murtz

Good answer and description, this is correct.

Reply to
Rob H.

2192: is a mortise rasp
Reply to
George W Frost

seen these. These are the fancy ones. On my farm, growing up, we used wood ones. They hold the cow in place so you can milk them.

Reply to
Lee Michaels

Tapered Reamer is all I can think for making tapered mortices in chair legs .

Reply to
Kevin(Bluey)

2196 - ball joint press
Reply to
Doug Miller

I thought for goats, but at 14" long and 9.5" high it's too small even for them.

Reply to
Dave Balderstone

Close but not correct

Reply to
Rob H.

It looks indistinguishable from the ones they used at Mystic Lake Indian casino (Minnesota) for 8-deck blackjack. :-)

In Loughlin NV, they actually deal with their hands. :-)

Cheers! Rich

Reply to
Rich Grise

Oops, I read the measurements wrong. They have be a model of some kind then. Salesman's sample?

Reply to
Lee Michaels

#2191 Bottle Opener #2192 Planemakers float #2194 Shoe (for dealing playing cards) #2196 For removing bearing from end of shaft?

Reply to
Scott Lurndal

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.