Sanding and top coat epoxy resin

now. Some of the wood soaked up more resin and has waves in it. Question is ; can I sand the resin and add top coat? Will it still be Crystal clear aft er?

Please take my word on this. Rather than to guess, ask others to guess, as k people you don't know to speculate on a solution, call the consumer hotli ne (or professional hotline) number on the can or on the manufacturer's web site.

I apply all kinds of finishes and they are all different. For example, I u se one kind of enamel that requires a second coat after two hours but befor e five. Before two, the finish outgasses and causes bubble and wrinkles. After five, and they require a 21 day cure time to start over.

The point being some finishes require special care to get it right.

IMO, if you are talking about bar top finish instead of a urethane epoxy fi nish, you are probably screwed. Call the manufacturer for guidance as soon as you can.

Robert

depends on the product depends on how thick the coats are and how thick you want the final finish to be

two ways to go but first a question

how solid is the marriage

if you answer it is solid then

tell her the uneven surface is to give the table character

if you answer no and making the finish thick is ok

you could place the table perfectly level and build a tape wall around the edge and pour a final coat of epoxy

vids and info online

look for bar tops

if the finish cannot be thick then work on making the marriage solid

maybe a new vase with flowers on the new table

Other than re the question you ask, show us a pic of your table. We like to view folks' good work, as well.

Sonny

Yes. However, before sanding/recoating, wash it well to remove any amine blush. You could also sand and polish rather than pour more.