Harbor Frieght now charging a restocking fee.

No idea. Maybe they will. Especially if enough people whine and b!t@h about it. Have you emailed their customer service?

There should. Maybe there was... like a tiny little notice on an ad or something. I'm guessing they will institute a policy in which they make sure to tell people at checkout of the fee on an item that qualifies. I wonder if they might start printing it on the packages, too.

I'm not coming to the defense of HF, however, most any pump that is rated at X gph AND Y inches of lift won't put out X gph AT Y inches of lift. The gph, unless otherwise stated, is usually a maximum output at minimum lift. Often the output at 1 foot is used. At higher lifts, or with restrictions in the inout or output ilines, output drops off. And really, 153 gph, about

You can simply walk away from the register and leave the store without paying. Just because your intended purchase is wrung up does not mean you have to pay if you are not at ease with the conditions.

You have now had your advance notice. Be glad they take it back at all, there is no low that requires any store to refund anything at all.

Unless you agree to a contract that specifically excludes the warranties, the Uniform Commercial Code imposes warranties of merchantability, and possibly other warranties as well, on sales of goods. If the warranty is not met, the seller is liable to the buyer for the purchase price, and possibly other damages as well.

----------------------------------- You are at the mercy of the General Energy Equation.

Without a performance curve, (Head Vs Flow), pumps will publish max head at no flow as well as max flow at zero head.

There ain't no free lunch.

BTW, "Head" = output pressure.

Lew

?? What does a warranty have to do with getting a refund. The seller can choose to replace or repair the item if the item actually has a warranty.

He said they started this month. This month is only 7 day old. Maybe some of the shelf tags did not get to the stores in time for the first.

Your point about notification is valid, but give them a few weeks to see what happens. Just as important, contact them and tell them of your concerns.

I can confirm what someone else described, they have more customers per square foot than anywhere else I shop.

If I pay $6 for 4 pair of work gloves at HF, I don't feel bad about tossing them out as if I paid $10 a pair at Home Depot. I get a lot of use out of my 6" Pittsburgh F-clamps I bought from them, for $1.99-2.99/each I think. I get a lot more use from them then I expected and would recommend them to anyone who has any clamping needs.

Are you saying the ones from Lowes are a lot better? I actually bought some from HF to use for glueing. I bought them thinking they were disposable, but I've washed my first one twice! : ) I noticed on the bag it says they are for *painting*. Can anyone comment on how well they work for painting?

Foam works great for latex paint. HF foam brushes are pretty flimsy foam, not one of their better values. But for a single touchup, they work fantastic. You just don't get good mileage (footage) from them.

-- A sound mind in a sound body is a short but full description of a happy state in this world. -- John Locke

There are different quality foam brushes, be advised. A great glue brush does not necessarily make a great paint brush.

Read the label on the product you are about to use. Does it mention a foam brush, does it mention a good quality foam brush? Some do, many don't. I have had great results with a Wooster foam brush using General Finishes Arm-R-Seal varnish, the foam brush was suggested on the varnish label. Many foam brushes will melt in paint thinner so those will certainly degrade when using in an oil based product.

What's "multiple times"?

You're gonna make me do more math!

The ten foam brushes from HF cost ten cents each. If you tossed each one after you used it, you would discard forty of them before you reached the price of your Wooster.

Now the question is: Can you get forty uses out of your, um, "quality" foam brush? (Ignoring the cost of the cleaning solvent and your time.)

Apparently you've never tried a Wooster foam brush. They are FAR superior to any other brand of foam brush, and are worth the money even if you only get 1/4 of the forty uses you mention. Most cheap-ass foam brushes are made of much coarser foam that limps and sags right off the handle before you can get any useful work out of them, and they swell up and break down under the effects of any significant amount of solvent like mineral spirits or alcohol. I even use (and re-use, many times) Wooster foam brushes to quickly spread glue out over large surfaces, and they give perfect, uniform results. Try that with your Harbor Freight cheapie.

Right. I've never used a Wooster brush. But "results" is a different issue than cost. I concede that your Wooster brush produces results that are the envy of all who encounter them.

As for gluing, I don't use a brush. I get the drop or two I need by squeezing the Elmer's bottle.

Yeah buddy! ... and a +1.

--------------------------------------- The folks at "The Brush" are like most of the rest of the businesses in Wooster.

They go first class of stay at home.

Lew

And you probably would not be as satisfied with any of them as you would be when doing a "fine" finish with a Wooster.

I would not paint with that brush! ;~)