Fwd: Cling Wrap

Bill · 2011-02-11T23:20:06+00:00

I thought this was good enough to share.Posted by Bob La Londe in the newsgroup Sometimes you have to put in a screw in a place that you just can't get your hand in there and if you drop the screw you are totally hosed. I was repairing a broken wire in my boat yesterday and ran into one of those. Of course it's a stainless steel screw so a mag tip wouldn't work.I couldn't find any of the screw holder screwdrivers I used to have, and it was late enough I wasn't confident in finding one at any stores that would still be open. I considered making one, but thought maybe somebody else would have a better solution. I did a search for DIY screw holding screwdriver or something like that and found a good tip that worked perfectly.Poke the screw through some cling wrap.Place the screw on the screw driver.Wrap the cling wrap around the screw driver to hold the screw firmly against the tip.Start the screw a couple threads.Pull back the cling wrap and screwdriver to tear the screw through.Remove the cling wrap.Tighten the screw the rest of the way.Its simple, elegant, works very well, and I wish had thought of it.

Feb 11, 2011 20 Replies

Rate this thread:

lektric dan 15 years ago

purple monkey dishwasher

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required

Fwd: Cling Wrap

Related discussions

WD40 - Penetrating oil ?

[SOLVED] gas fireplace won't start-up - pilot is lit

Bread Machine recommendation. Want one NOT made in China.

Join the Discussion

Didn't find your answer?