FS :Neanderthal tools

Apr 07, 2004 0 Replies
Saved reading

#5 type 19 98% japanning almost full blade clean $40


#5 Type 9 $50


#5 1/2c type9 japanning 95% small chip off top of tote $85


#5A Aluminum Clean w/ partial decal on tote $100 for those overhead planning jobs


#6C Type 13 60% japanning small chip front right flare $50



English Steel infill with Sorby blade..normal nicks & dings rosewood infill..wedge a bit chewed up, but doesn't detract from use.$140


Millers Falls #14 type 2(Stan equiv: #5 T17) $45


#10 type 6..carrige makers rabbet.beautiful patina..shortish blade.. apology's small chip out of right rear end of the flare sidewall small square notch 1/4" in center of rear, almost looks like it was done from the factory .chipped tote both cheeks solid .$140


#10 carrige makers rabbet apology sidewall above left cheek brazed..old repair.. cracked and repaired tote still a good solid user..$100


10 ½ carrige makers rabbet..no apologies..beautiful shape.nice patina $165


# 190 rabbett..correct blade no depth stop(but one from a #78 fits) $25


#190 bull nose rabbet..well not exactly, it's a #190 with the front ground off..works real well as a chisel plane.worth it for the blade(Stanley Rule & level in arch circs 1915) and the cap iron and screw.$10


#18 type nickel flaking from cap but ready to work.$25


Serious Collectors only:


Picture 1


picture 2



9 ¾ type 5 block plane correct blade but short..ball knob in great shape..plane fine patina a real hard plane to find, certainly very good..could be cleaned to fine 85%+ japanning $ inquire


Walt Quadrato


489 Meadow St


Waterbury CT 06702 snipped-for-privacy@snet.net



203-754-7805

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required