Anybody tried the Fujispray Q3 HVLP or pro ? looking for feedback

This seems like a good machine at a modest price....BUT..its only available in England if you live in europe.SO I thought I would ask you chaps if you no anything about them.If not it`ll have to be a wagner

8800 hvlp but that costs twice as much Russell
Reply to
Russell
Loading thread data ...

I have had a Q3 for about 3 years or so now and I have zero complaints. I have sprayed everything from water based dye and shellac to water based poly with great results. Like any new tool there is a learning curve, but once you understand the tool it is a great time saver and produces excellent results.

Russell wrote:

Reply to
L. Wilson

I sure don't have any complaints about my Q4. It does a great job with everything I have put through it.

Reply to
Mike G

Went and had a look at the Accuspray here in Holland but hey what a price 1000euro compared to the Fuji at half the price and ok I can only see the pictures but it doesnt look so much different other than the Accu has a plastic spraygun

Reply to
Russell

FWIW, I've had a Fuji Q4 for almost 2 yrs now. It probably has 200 hrs of operation on it, sprayed latex house paint, enamel, poly, stain. No problems at all. My experience is that the owner, Paul Smith, is very helpful if you have a question or 2. I would recommend getting the Q4 (which has more stages in the the turbine blower) unless you're *really* sure that you're only going to spray thin stuff.

regards,

Rex

Reply to
Rex_flex

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.