v for frequency?

Since when did we start using v for frequency? v is velocity, f is frequency, lambda is wavelength. Using v for frequency is pure insanity.

formatting link
formatting link

Reply to
Commander Kinsey
Loading thread data ...

It's only insane for those ignorant of the fact in this case v is the Greek letter nu and has no relation ship to your v for velocity. The capital is N.

formatting link
Sheesh anyone with an IQ over 90 would know that.

Reply to
Fredxx

Any time you folks feel like taking this pissing contest back to your own shores, go with our blessing. ;)

Cheers

Phil Hobbs

Reply to
Phil Hobbs

Any time you feel like commenting, dont. Both of these areseholes are in my kill fille

Reply to
The Natural Philosopher

Well, if you put me there too, you'll be just that much safer. Can't be too careful.

Reply to
Phil Hobbs

Killfiles get confusing when you see followups to posts that you can't see. It's easier to just ignore the known jerks.

Reply to
John Larkin

I use Thunderbird filters, set to 'mark post as read" or "ignore subthread", depending on the case.

Cheers

Phil Hobbs

Reply to
Phil Hobbs

Reply to
jim.gm4dhj

So far you haven't displayed the emotional pot stirring, bigotry and the total lack of intelligence of the denizens of my kill file.

Reply to
The Natural Philosopher

No can do. 70% of uk.d-i-y is total drivel from about 6 usual suspects. I dont want to waste what is left of my life reading it

Reply to
The Natural Philosopher

I'll obviously have to up my game. ;)

Cheers

Phil Hobbs

Reply to
Phil Hobbs

Excellent, then that means you don't see the numerous corrections I make to your posts.

Reply to
Fredxx

One of which is you.

When you stop spouting lies on on uk.d-i-y I'll stop telling the truth you prefer not to hear, for which you have no response.

Reply to
Fredxx

They had to name it after somebody, rather than using something actually meaningful.

Like Celsius instead of centigrade.

Reply to
Mark Lloyd

Are you thinking of lamba λ (like an inverted v with a tail on one leg) which is wavelength (c/f) where c is speed of light and f is frequency.

Reply to
NY

(I assume "tan" is a typo for "than", rather than the trig function!)

I can see an advantage in abbreviating "c/s" to "Hz", especially when it is spoken aloud - "482 mega hertz" is shorter than "482 mega cycles per second".

Are there any other SI units which are abbreviations for the reciprocal of another SI unit? I suppose there's mho for conductance which is 1/R (in ohms) and written as an upside-down omega. But that's not as widely used.

The notation that always jars with me is the use of negative powers in place of "per". My Nuffield Physics O/A level books always referred to speeds in m.s^-1 and accelerations in m.s^-2 (where "^-1" denotes a superscript "-1" etc. The teacher was undecided as to how you pronounced that: was it "metres seconds-to-the-minus-1" or "metres per second"?

Negative superscript units always seemed to be a gimmick too far.

And then we get onto the thorny issue of "traditional" versus IUPAC names for chemical compounds - acetic versus ethanoic acid, isopropyl alcohol versus propan-2-ol: the traditional names are more familiar but the IUPAC names are more systematic and more accurately represent how the atoms are arranged. Familiar versus Sunday-school names ;-)

But the ultimate "grates like chalk on a blackboard" usage for me is kilometre pronounced "kill-OMM-i-TAH" when all other SI prefixes and units have the stress on the first syllable "KILL-o-ME-tre" (as for "MIcroMEtre", "MEGaMEtre" etc). It's hilarious to hear Prof Brian Cox flipping between "kill-OMM-i-TAH" which his director has probably told him is the trendy pronunciation and "KILL-o-ME-tre" which he always used in scientific and engineering work - sometimes he does it from one sentence to the next.

I once worked with a guy who used the trendy pronunciation for lengths of running races or distances along roads, and the scientific pronunciation for units in scientific/engineering contexts.

Reply to
NY

"On our constants and equations sheet, the italicized v stands for the greek letter nu, which is the variable for frequency. The regular v stands for velocity. On that sheet specifically, c = λ v and E = hv are the only equations that use the greek letter nu (frequency). Hope this helps!"

formatting link

Reply to
The Natural Philosopher

This makes my brain Hertz.

Brian

Reply to
Brian Gaff

Mine too. I still say cycles more than Hertz. Just as I often say 110 instead of 120 which is more like 125 volts now. Guess we need to rename or put a name on standard line voltages. Just call them Angie, bill, Carol for the 120, 240, 480 volts !!!

Reply to
Ralph Mowery

For conductance (1/R), suspectance and admittance (1/Z) the unit is Siemens (S).

Reply to
upsidedown

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.