We have a new kiln rated at 3.6kW. It requires a single-phase supply.3600/230=15.7A. It has 16A 2P+E plug on it like this one: the shed I have a 30A ring with standard 13A dual-gang switchedsockets. Can I use one of these: not, what are those connectors for? And what is the best way topower the kiln?There is a consumer unit in the shed with space for another breaker.Many thanks.

> ?Hi,The unit you have found is for plugging a caravan in. Something like this is needed and fit a 16A breaker and rcd as required.

Using a 16A appliance in a 13A socket?

Feb 03, 2010 84 Replies

Rate this thread:

Brian Gaff 8 years ago

As \ISay if the right fuse is used cannot see a problem. Brian

Vote

Graham. 8 years ago

Unlike HRH I don't suppose you are accustomed to being addressed as "Sir".

Vote

Scott 8 years ago

Do Indian plugs have fuses? I thought they used our old round pin system,

Vote

pamela 8 years ago

I think many of those outraged at his comments didn't pause to call him "Sir" either. :)

Vote

tabbypurr 8 years ago

All will be well.

Vote

Have something to add? Share your thoughts — no account required.

Ask the community — no account required