true.
- Vote on answer
- posted
19 years ago
Speedfit vs Pushfit vs Hep2O etc.
Loading thread data ...
- Vote on answer
- posted
19 years ago
I am glad you pointed out the obvious, Christian. I really hane not had a speedfit fitting leak, except when not pushed fully home.
IMM, just accept that JG is another of achieiving the same end result.
- Vote on answer
- posted
19 years ago
It is crap. A crap design. Crap manufacture. O rings should not come loose when a perfectly square cut pipe in inserted onto the fitting. They should look at Osma gold and copy. Note none of the fittings contain metal, they are an ex plastic toy company.
- Vote on answer
- posted
19 years ago
They don't. This only happens if the pipe has been hacked.
Who? Osma or JG?
There are stainless steel teeth in Speedfit fittings. You would have known this had you read the installation instructions - they are clearly shown in a cut away drawing of the fitting.
Osma have metal components as well.
- Vote on answer
- posted
19 years ago
Balls. You know nothing about pipes.
JG. Remember Girders and Bridges. they advertised on the TV.
...you don't say....
Lots of them like metal encapsulated fittings and stainless inserts.
- Vote on answer
- posted
19 years ago
On Mon, 22 Nov 2004 18:44:11 +0000, "Ed Sirett" strung together this:
I'm not sure whether you;re disagreeing with me, or whether I disagreed with you. Anyway, I wholeheartedly agree with your above statement.
- Vote on answer
- posted
19 years ago
I have no investments in this sector of the construction industry.
It wasn't me who had difficulty reading the instructions, was it......?
>- Vote on answer
- posted
19 years ago
No, difficulty reading what I write. Bets you print off everything I have posted for the past 3 years and read them all.
- Vote on answer
- posted
19 years ago
I imagine that everybody has that difficulty.......
I never go to the bookie's
- Vote on answer
- posted
19 years ago
No only you and handful of retards.
Shame.
- Vote on answer
- posted
19 years ago
Hi IMM In you wrote: Andy:
IMM:
Andy:
Shame you can't reply in a coherent fashion. You've even managed to write a nasty response to something that you wrote!
- Vote on answer
- posted
19 years ago
What? 'snip rubbish' about 10,000 times?
- Vote on answer
- posted
19 years ago
What I meant was the allowance to twist lock, which provides a tighter seal, makes it easier to push the pipe home than other fittings, IME.
- Vote on answer
- posted
19 years ago
You know you're not a pro and blind?
It explains your grammar, then. The other is common knowledge.
- Vote on answer
- posted
19 years ago
< snip babble yet again >