Source/make/model bed risers with grooves

To state the obvious: it would be very easy and quick to make something suitable.

Something like:

Cheers

Dave R

I have some things called 'Elephant Feet' if that helps.

My DIY capabilities are constrained by health and wealth :(.

Am 03.08.2025 um 19:31 schrieb Jethro_uk:

Would these fit?

I may be able to turn a length of 4x4 timber into what I want, thinking about it. Screwing a couple of strips onto the top to make a channel ....

Understood. You can likely do it for cheap using scrap / scavenged wood, but it does help if you are able to cut and screw together wood. Power tools help if you don't have much strength.

Something like that, or cheaper three long pieces of wood, one whose thickness roughly matches the thickness of the bed edge so they clamp around it. Add some legs for additional height, so they don't need to be fully 4" high. Like this in profile:

|##| |##|

--|**|-- |**| |**| <---- foot +--+

where ** is your timber and ## is the bed edge. Neither piece needs to be the full length of the bed, but the 'foot' part can be shorter than the 'clamp' part.

Theo