The "flood warning E15 has come on. It happened once before and I got into the base to drain the stupid little pot that collects the spillage. I couldn't see any shource of a leak, Emptied it and it carried on for about a year.
I need to do it again - but I can't recall how I removed the trim on the bottom of the front. I recall that last time I removed the front of the door first = but reflected that I hadn't needed to. Any advice before I do it again.
JohnP snipped-for-privacy@nowhere.com wrote in news:XnsACAF603A682F0JohPnowherecom@81.171.92.236:
Done it ! Not sure how - but wiggling an pulling seemed to work.
Stupid design of a little sump with no means of emptying it. Presumably a terminal falure situation after a costly service call for most people.
Emptied it - but can't see an obviousl leak point.
I had the same problem with Siemens dishwasher. I tightened up the screws inside, around the top of the drain/filter and that extended the time between E15 error codes. I think there is a seal underneath those screws which fails - design fault.
Oooh Thanks - will look right now.
Biggles snipped-for-privacy@the-shillings.net wrote in news:rthol5$su5$ snipped-for-privacy@dont-email.me:
4 Torx headed screws - thighteded about a quarter turn. I am hopeful.Well maybe an eighth of a tuturn - it felt right.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required