I had this situation once. I removed the cam and then used a Dremel to cut a slot in the underside of the shelf, wide enough for the pin to pass through. repeat as necessary. Then lift the shelf off.
I had this situation once. I removed the cam and then used a Dremel to cut a slot in the underside of the shelf, wide enough for the pin to pass through. repeat as necessary. Then lift the shelf off.
I refitted it on un-repositioned pins. I had another reason for removing it.
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.