Plug-in air blower

Nov 18, 2024 Last reply: 1 year ago 12 Replies

I want a blower for cleaning filters, blowing through tubes etc. An air compressor would be very nice bur overkill for what I need.



I've tried searching and looking on Ebay but get mainly leaf blowers. Trouble is, I don't know the proper term for them.



I want a nozzle-type blower (air gun - I actually have one in my 'might be useful one day' that's been there for about 40 years!). Doesn't need to be high pressure and some control would be useful.



ISTR a tread on here some time ago but have forgotten the details.


Is a hair-dryer blowing cold air through a concentrator nozzle not powerful enough? There is usually at least a couple of speeds available if you want some control.

There are 'shop' or 'site' blowers, but they tend to be battery:

formatting link
Are you sure you can't just get a leaf blower with a set of attachments? It seems to boil down to the same thing. eg that one, even though all the pictures show carpentry uses, is still described as a leaf blower at the end.

Theo

If it is only a small job, then google for "air duster". These typically range from small hand-held blowers to cans of compressed gas, such as

formatting link

Something like:

formatting link

Battery powered, not 240v (link may wrap) -

formatting link

Thanks, might be one of those that'll do - I'll have a look through them.

Thanks to others for their suggestions. Some are too expensive, some too big. I'll see if a hair drier might do - I've a hot-air gun that blows far better than a HD but it doesn't have a cold setting!

I really want the equivalent of a small compressor sans receiver and that'll take a bit of hose and the gun that I have.

Are you seeking something to give low volume air but at a moderate pressure?

What I have seen used is a car tyre with adaptor on valve. This then feeds a airline hose and a normal airline type nozzle.

The car tyre can normally be pressurised to 40 or 45psi (80psi if you have one of the emergency get-you-home tyres), and will provide a reasonable burst of air for a few seconds.

Hadn't thought of car tyres (last car went for scrap in '73) - cheers.

BTW, suggestion of hair drier: mine doesn't have Cold but, as it's about 50 yo it has screws so I might do a little mode so that it does blow cold, after trying it with a narrow nozzle to check if it can manage useful pressure.

You may find that at least part of the heating element is used as a dropper resistor for the fan motor, so it can't be disabled.

Thanks for that - might not be as simple as I thought.

This chap compares impact wrenches and various other tools, this week it's the turn of air blowers

formatting link

Thanks, looks like a useful format. I've downloaded the video to watch later.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required