Some background:
I need to hang some pine kitchen cupboard doors to two small-ish alcoves, either side of a fireplace, to fill them in, three doors in each. The alcoves are wider than the doors by approx. 120mm each side.
I plan to fit a plinth to the bottom to match the height of the skirting, then a door, then above that a 2" pine seperating piece, then a door, seperator, door, top piece.
To fill in the gaps either side of the doors I will run a length of pine up each side, fixed to the shelves probably. The problem I can't think of a way round is fitting the doors to the pine sides because they will be edge-on to the doors - i.e. flush next to the doors, not like a cupboard. I could use normal hinges, obviarsely, but I'd like to use normal kitchen cupboard hinges if possible because the doors already have the large circular cut-outs in them.
Are there any kitchen hinges which are suitable for mounting in a "straight line" so that the doors end up flush with the surrounding pine? I've seen ones which open differing degrees but these would need to open...*thinks*...270 degrees at least, preferably more, because they'd start at 180 degrees open already, iiswim.
Si