DIY sheds selling stainless screws

Which / Do any of the DIY sheds / local builders merchants sell stainless steel screws ? I need some for prototyping and need to look at them etc. Various lengths around 20mm etc. Screws will be embedded in cement thus stainless. I can use some aquapanel screws I have but they are too long for some areas. Cheers, Simon.

Reply to
sm_jamieson
Loading thread data ...

I don't recall seeing them in the sheds. Screwfix sell them and have a number of trade counters. Your YP may list one or more specialist fixing suppliers.

Reply to
Tony Bryer

Places that sell bits for boats will have them - probably expensive but often in small packs so handy if you only need a few

Reply to
Mike Harrison

I have a pack that I bought from B&Q, same range as Screwfix, but only in the very largest B&Q outlets.

Reply to
Steve Firth

Where abouts are you, I know somewhere with real prices in Loughborough.

Reply to
visionset

Coventry. Cheers, Simon.

Reply to
sm_jamieson

B&Q do a few. Screwfix have a fairly comprehensive range

Reply to
Andy Hall

Stainless steel can corrode as readily as mild steel if air is excluded from the surface.

Colin Bignell

Reply to
nightjar

What ? But I presume I am preventing rust, which needs oxygen, so either way I am safe. Any probs with stainless in cement ? if so makes a nonsense of stainless EML instead of galv, etc. Explanation ? Simon.

Reply to
sm_jamieson

It's not a Shed but Components Direct have a very good range of both

"regular":

formatting link
"spax":
formatting link
good value too (IIRC £50 incl. VAT for free delivery)

David

Reply to
vortex2

Ot what about one of these:

formatting link

Reply to
vortex2

'Stainless' steel relies upon a surface film of oxides of chromium and nickel to keep it from rusting. Provided that sufficient oxygen can reach the surface, that film is self-repairing. However, as some yacht owners found out in the 1970s, when their keels started to drop off, if the level of oxygen at the surface is too low, the film cannot repair itself and the steel will readily rust. General purpose stainless steels are also likely to have minor surface contamination, which, because they break the film, can act as corrosion foci and lead to pitting. There are many situations where a well-protected carbon steel will serve as well, if not better, than stainless steel.

Colin Bignell

Reply to
nightjar

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.