My Hygena dishwasher seems to be getting hot at the wrong time.... Whatever= setting I put it on (pots, normal, economy), the water seems cold until it= gets to the rinse phase when it gets hot. I'm presuming this is not normal= but wondered what the problem could be.
Thanks
setting I put it on (pots, normal, economy), the water seems cold until it gets to the rinse phase when it gets hot. I'm presuming this is not normal but wondered what the problem could be.
Final rinse is normally hot, in order to dry the things in it afterwards.
If it's not heating during the main wash on a programme where it should do, that would imply a fault with the programmer/timer most likely, given that the heater itself seems to work OK.
Are you sure you aren't simply catching it during pre-wash and early rinses, where cold water is used?
Have something to add? Share your thoughts — no account required.
Ask the community — no account required