Hi,
I need to cut some circular holes in some travertine floor tiles to accommodate some floor lights which are about 5cm diameter.
Any suggestions for the best tool to cut a good circular hole??
Andy
Hi,
I need to cut some circular holes in some travertine floor tiles to accommodate some floor lights which are about 5cm diameter.
Any suggestions for the best tool to cut a good circular hole??
Andy
============= You could try a tile cutting jigsaw blade - available from Wickes. It works very well with ordinary wall tiles with no edge cleaning required afterwards.
Cic.
Yerrs...I was thinking abrafile..but this is better..need a diamond ideally ..and you SHOULD be able to rwap emery paper around a bit of pipe and get the final finish pretty good, but it takes a lot of tume to sand marble...
Just use a HSS hole saw.
Time? Not really, it's rather soft stuff.
Not as soft as balsa wood..and Ive spent all day sanding that in my time :-)
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.