Best product to replace mouldy shower sealant

Got bad black mould on bottom white sealant in shower cubicle - is there any difference between the anti-mould sealants and if so which is better.

Also I've seen that a tape can also be used which looks a lot easier to do. Any good?

Pointers to a good video on applying sealant would be good. Including tools and removing old.

Thanks

Reply to
John Smith
Loading thread data ...

Just wipe it down with bleach occasionally. And use a daily shower spray.

Or if you are too lazy, learn to love its artistic effect.

Reply to
The Natural Philosopher

My experience with any of the tape products is that they are only as good as the glue or double sided tape. It's the glue that fails over time allowing water behind the tape which in turn destroys more of the glue holding te tape on. Furthermore if a tiled surface the grout lines are probably recessed from the tile surface. The tape will not mould into a 1/8 inch recess and so on every vertical grout line there is the potential to let in water behind the tape.

With sealant it's probably better to get a 45 degree profile on it rather than a concave profile as you may get with smoothing off with your finger.

Invest in some profiling tools Random example

formatting link
formatting link
?v=6vjTxTFL-k0

Fugi, Fugiboy etc. tend to be the brand name for these sets at £20 but the equivalent can be had for a fiver. Mine cost under a fiver from Lidl when they once had them in stock.

Reply to
alan_m

Bleach works but in my experience only if you catch it early enough. Last year I tried to treat some black mould that hadn't been treated for maybe 10 years. A quick wipe down with bleach didn't do much and leaving the joint wet with bleach* for 24 hours only got rid of around 75%.

*rolled up paper towel was pressed on top of the joint and then the paper towel soaked in bleach and not left to dry out.
Reply to
alan_m

It was claimed that the Modified Silane sealants were supposed to perform better in this respect, but my own results have been mixed. Yes they do stick better, and can be over painted, but the are slightly harder to work, and can still go mouldy in particularly wet environments.

So basically pick a decent brand name sanitary silicone and hope for the best!

Probably not as good as silicone - chances are water will get past it at the grout lines.

Some in the links here:

formatting link

See the above article

Reply to
John Rumm

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.