artex mess

-----------------------

I think you need rodders to help with this, it's the only way.

common problem?

I had this with a ceiling that had distemper on and had been subsequently painted with emulsion, which came off in sheets when I tried to paint again. In the end I had to scrape its all back and use Artex Stabilex staibilising solution, and it has been fine since. Zinsser Guardz is the other product I've heard can help.

I thought it sounded like distemper too.

me artex left over so I thought I'd put it on the ceiling of a walk-in cupb= oard under the stairs. The ceiling had been previously painted and apart f= rom a few flaky bits that I dealt with, was reasonably sound. I applied a = dilute coat of PVA and a couple of days later applied the Artex. I might a= s well have been applying paint stripper!!! The paint just bubbled and cam= e away from the ceiling making a hell of a mess. I've now used the artex t= o strip off all the paint! There is nothing on the pot to warn me that thi= s might happen. Can anyone suggest how I might treat the ceiling before pr= oceeding? Is this a common problem?

Thanks guys. It is the same problem. I couldn't believe it when it came o= ff in sheets! I think it is lime plaster with some kind of wash on it, pro= bably distemper. I'll go for the stabiliser I think. Many thanks for resp= onding.

me artex left over so I thought I'd put it on the ceiling of a walk-in cupb= oard under the stairs. The ceiling had been previously painted and apart f= rom a few flaky bits that I dealt with, was reasonably sound. I applied a = dilute coat of PVA and a couple of days later applied the Artex. I might a= s well have been applying paint stripper!!! The paint just bubbled and cam= e away from the ceiling making a hell of a mess. I've now used the artex t= o strip off all the paint! There is nothing on the pot to warn me that thi= s might happen. Can anyone suggest how I might treat the ceiling before pr= oceeding? Is this a common problem?

Yes, I think it is the same problem. I couldn't believe how it just peeled= off in sheets! The ceiling is lime based plaster with some kind of wash, = probably distemper. I think I'll use the stabiliser. Many thanks for resp= onding.