Failed central heating valve?

I turned the shop zone programmer off and, there being no other call for heat, the boiler stopped. What I said above is not quite true - it was the downstairs heating coming on which caused the shop heating to also come on.
Posted by Graeme in UK Do-It-Yourself Forum 9 years ago 
Equipping a new shop on $50,000

I'd investigate getting a high-efficiency flywheel and see about setting up a shop with lots of tools whose motive power comes from belts. I'd look at being able to spin up the flywheel with a Dodge pickup.
Posted by Mark Jerde in Woodworking Forum 22 years ago 
shopdogs

She doesn't mind being in the shop when I'm doing neanderwork, but she get's too wound up and won't stop running around so I generally don't torture her by locking her up in the shop with me. Mike
Posted by Mike in Mystic in Woodworking Forum 22 years ago 
Gaqrage Door Window Ideas

If you put the glazing in the top most panels the light will make it further into the "shop" and you should still be able to see out. A side benefit is that, unless you are down hill from the road, someone would have to get rather close to the door to see anything in the shop. John
Posted by John Grossbohlin in Woodworking Forum 22 years ago 
Good planer?

While three individual machines in a roomy shop are of course superior in a small shop (and with limited budget) such a combination is really useful. Unfortunately it's now several hundred kilometers away from my workshop...
Posted by Juergen Hannappel in Woodworking Forum 22 years ago 
Best Method for applying Strapping

Another week or two and I'll be ready for the electrician and near completion of the shop. Thanks to everyone for their suggestions. Have a Good Weekend in the shop. Rich
Posted by RKON in Woodworking Forum 22 years ago 
Doinked by Delta, AGAIN!

I have to move it down to the basement shop. And the electrician isn't coming for a couple of weeks for the shop. Ughhh. I better inventory this stuff this weekend. Did you call Delta? What did TP say? Hope all ends well. Rich
Posted by RKON in Woodworking Forum 22 years ago 
Hose adapter/Makita ROS

Does anyone make an adapter to fit a shop vac hose to the dust collection port on a Makita ROS? I tried matching up the port with some PVC but it seems to be an intermediate size. I'd really like to hook it up to a small shop vac ala the Fein sander/vac combo. Any ideas welcomed. ...
Posted by John Emmons in Woodworking Forum 22 years ago 
Tom Plamann article - new shop

Would be nice if he put up jpgs of the new shop. If he could get the MOAL going in the old shop, can you imagine what he's gonna go for in the new one? :)
Posted by Noons in Woodworking Forum 21 years ago 
Re-stain over tung oil?

Norm's shop is likely temperature controlled and he/someone may have made sure the BLO was completely dry.
Posted by Sonny in Woodworking Forum 15 years ago