13 discussions on HomeOwnersHub about the Grizzly G1019: what owners asked, what went wrong, and what fixed it.
Recently acquired a decent 2 hp 110/220a motor, and am now wondering ifit would be too much for my little BS. Has anyone had any experiencewith big motors on small bandsaws? Would this be the funny car of thewoodshop? Regards,H
I own a grizzly "ultimate" 14" bandsaw, and have tried on a fewocassions to resaw with terrible success. I've tried with and withoutfence. Last night I tried to resaw a 5 1/2 wide piece of Walnut. Likethe other times, the blade winds up...
Hi all. First post here. After working in my dad's commercial cabinetshop for 12 years growing up, I'm now out on my own and puttingtogether my own garage workshop for my amusement.My new Grizzly 14" bandsaw arrived yesterday, and I'm...
I just purchased a new 14" Grizzly Utltimate Bandsaw with a 6 inchriser block which gives it a 12 in capacity. After setting it up andfollowing the directions for tensioning the blade and setting theglade guides (it has sealed bearing...
I have the grizzly 14" "Ultimate" bandsaw and I am working on my firstcabriole legs. I was making shaped cuts out of 4" white oak and forsome reason, the saw just will not seem to stay tuned. I can seeminglynever get through a complete cut...
I'm shopping for a band saw to replace an old little 3-wheel craftsmanI bought used.I was TOTALLY dissatisfied with the craftsman. It lasted about 10minutes before the synchronous belt broke and a replacement is nearimpossible to find. In...