Low toilet water level in bowl

What might cause this condition?

Reply to
Ranger
Loading thread data ...

How is water level inside your holding tank? Too much water in the holding tank may cause this problem.

Ken

Opportunities are never lost. The other fellow takes those you miss.

| Torrey Hills Technologies, LLC | |

formatting link
| |
formatting link
|

Reply to
Torrey Hills

Most of the time, a vent problem. If the toilet gurgles up a storm on flushing and ends up low it's almost certainly a vent problem. In the rare case that things flush fine and fill normally, but end up low later the possibilities are a crack in the toilet, or some gunk buildup that's acting like a wick to drain the siphon.

Reply to
Pete C.

An often overlooked cause is the tank ballcock refill tube.

It's a 1/4" tube from the fill valve into the flush valve overflow standpipe. As the tank is refilling, the tube runs a jet of water into the overflow to refill the bowl.

Jim

Reply to
Speedy Jim

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.