Flushed A Cap down Toilet

Once had a toilet overflow one day and work the next, off and on, off and on. Pulled the toilet, kid had dropped a round mirror in and it worked like a valve opening and closing.

It might rust out in 50 yrs if you can wait.

Ah, reminds me of my days as a landlord. If the hose doesn't work try the snake from the bottom again. But this time force a wad of newspaper through with the snake to clear the trap.

As an aside Toto makes a great line of toilets and this would be a real good time to look at them :-) Dave

One more idea:

If not too inconvenient and you've got a strong guy around, can you remove the toilet once again, take it outside and try flushing it out from the bottom with the full flow from a garden hose. That might just blow it out the bowl end of the trap.

A fire hose would be even better, but how are 'ya gonna get the use of one?

HTH,

Jeff

Not likely. If it's steel, it's almost certainly plated with something (chrome, zinc, etc) to prevent its rusting under normal conditions. Yeah, it will rust away eventually, but possibly not in your lifetime, and certainly not before some kinda sh*t gets snagged on it and backs up your toilet.

Note that as it rusts, the snagging problems will get WORSE, not better, because it will change from a nice smooth round surface that things slide readily off of, to a rough, craggy, rusty surface that will snag anything that drifts across it.

Of course, if it isn't steel at all (which is quite possible), it doesn't matter *how* long you wait, it's not going away.

You're dreaming. Sorry.

Magnet on a string, if it's steel.

Closet auger would have a better chance of dislodging it than a normal snake.

Lots of auto parts stores have three-pronged parts grabbers at the end of a two-foot snake. They're great for picking up stuff that you drop in places you can't reach. I have one in my toolbox, and that's actually the *first* tool I'd reach for if I had this problem.

-- Regards, Doug Miller (alphageek at milmac dot com)

Nobody ever left footprints in the sands of time by sitting on his butt. And who wants to leave buttprints in the sands of time?

Well, if you have the toilet removed how much extra trouble is it to take it to the local fire station?

Just make sure you arrive with some type of "donation" or they're likely to remind you that city/town equipment cannot be used for such tasks.

How about using a blower or a shopvac? I don't see the need to using much lower pressure water and making a mess. Some other brilliant poster's idea (that means I agree with him!) was good - stick in some wadded up whatever and then blow/suck that throw if the blower/vac doesn't work by itself (it will).

Few (only the best) have a trap larger than 2" and very few have one

Maybe this is God's message to you telling you it is time for a new toilet.

Good Luck.

I'd start with a strong "neodymium" magnet attached to a good string. Flush and see where it sticks.

Excellent use!

Why don't you quit fooling around with it and go to Menard's and get a new one on sale? They don't cost that much.

Get an old fashioned mop head. Remove it from the handle.

Remove the toilet once again. Tie a rope to one end of the mop.

Snake the rope through the toilet and then force the mop and hopefully the lid back out. If the lid gets turned sideways it may not work. Eventually the lid will get positioned correctly and come out.

Probably stick to the cast iron toilet bowl?

I've never seen a toilet made of cast iron. Have you?

-- Regards, Doug Miller (alphageek at milmac dot com)

Nobody ever left footprints in the sands of time by sitting on his butt. And who wants to leave buttprints in the sands of time?

Most of the toilets I've seen are porcelan coated.

I doubt that. I imagine most of the toilets you've seen are made entirely of porcelain.

-- Regards, Doug Miller (alphageek at milmac dot com)

Nobody ever left footprints in the sands of time by sitting on his butt. And who wants to leave buttprints in the sands of time?

Just pictures-