Homelessguy and facts, logic? Good grief, that does not compute.
He's a clueless troll with a serious penis envy directed at the USA. As nestork correctly pointed out, there are all kinds of real attrocities going on in the world today. North Korea, Central African Republic, Syria, Putin gobbling up the Ukraine. Yet all this dope drones on about in one OT post after another is the USA?
A friend uses "welding oxygen" to fill his breathing tanks for high altitude flying in his Harmon Rocket.
Hope he doesn't catch fire and explode. My guess, he'll be fine.
Medical oxygen must be at leas 99%pure, no odor. It is also tagged with the lot so it can be traced. Often, it is from the same tanks as welding oxygen as ts long as they both meet the minimum requirements, that is OK to do.
In real life, I'd use welding oxygen if I was in need of it to breathe, but as a supplier to patients, I'd not give it to you unless it had the right tag. It keeps the lawyers away.
it just proves that you can't beat *stupid*
It is not necessarily the Oxygen that is different but the tank. The tanks look the same on the outside but are markered different. Medical oxygen tan ks are held to a higher standard than industrial oxygen. Medical tanks are "Oxygen clean" whereas welding tanks may not be as clean. Medical oxygen is also dryer to prevent rust in the tanks.
Bullshit . That medical O2 comes out of the very same tanks as welding O2 . And in some cases welding oxy is held to a higher standard of purity . And any impurities in the tanks can cause the same problems , no matter the intended end use . CHECK THE DATE ON THAT POST , you're responding to stuff from 5 years ago .
"Industrial" oxygen purity requirements CAN excede medical specs. I have friends who recharge their high altitude flight oxygen bottles from their welding oxygen tanks.
On Thu, 28 May 2015 20:58:30 -0500, "Terry Coombs" wrote in
+1
That's what you get from a google grouper. Still an interesting question that I have never seen.
The main difference is that Insurance won't pay for it out of the other tanks. The other thing is that I don't know if the regulators are similar enough to regulate how much O2 you get and if they are compatible with the tubing for delivery.
It seems to me all this depends on what the intended concentration is in the first place. If one is 100% O2, or 98% and the other is 92%, they're both still way higher than air. As long as the other 2% or 8% isn't poisonous, if it's nitirogen with a little helium and a trace of argon and a bit of xenon, it's going to work for breathing for sure, and I would think it would work great for a torch. As long as their both high, it doesnt' seem to matter which has a higher standard.
Though I think AZ may be right and there shouldn't be too much water in the tank or your lungs may rust.
I have never seen oxygen at a welding store that wasn't medical rated on the label. Perhaps if you are just swapping a little prestolite tank it might not be but the 80s and larger I see have the medical label on them.
Medical/aviator 99.95% purity Welding 99.99% purity Analytical 99.999% purity
All filled from the same liquid oxygen supply, only the analytical grade gets extra attention.
Your world is very different from mine. I was using medical oxygen that was just compressed air filtered for pollens and moisture. No liquid oxygen used, just regular air from the environment. I was surprised that was all the 'oxygen' tanks held.
That is not medical oxygen. Oxygen concentrators remove the nitrogen so you get more O2. That would be medical oxygen.
On point that has been missed talking about the differences between welding and medical oxygen. Medical has one important feature: A certification.
Actually two, an insurance company willing to pay for it.
better and cheaper to get a oxygen accumulator, it somehow filter the nitro gen out of room air.....
and is pad for by insurance
When you get an O2 concentrator, they also give you a couple of tanks for portability, also covered. The best is actually to have liquid oxygen and a fillable portable. This cost the supplier more and needs more maintenance and insurance pays the same. Typical fill on a liquid tank is 7 to 10 days.
A concentrator is electric so it does cost to operate. Liquid makes no noise .
Insurance will pay for tanks for portability, but will not pay if you call those same tanks as emergency backup for power failure.
That's great when you are at home. Out and about the little "puppy" tanks are almost a necessity.
please can u get back to me re weather or not I can use 02 industrial oxygen for my ozone generator.. I usually use 02 medical oxygen....but the machine convert,s it . thankyou can u get back to me snipped-for-privacy@gmail.com
Have something to add? Share your thoughts — no account required.
Ask the community — no account required