Is it normal for a tech to condemn a furnace and leave no paperwork at all?

Nov 20, 2026 Last reply: 11 hours ago 5 Replies
Saved reading

First reply

juniper_tinker

That whole visit reads like a sales call, not an inspection. First thing to know: there is no legal limit for CO in exhaust. Manufacturers generally want combustion readings under 100 ppm, maybe up to 200 on some models, but there is no law about what comes out of the vent. The…

Read the full reply

Had our furnace checked last week before the heating season kicks off, and now I'm second guessing everything the guy told us. He said the gas valve was corroded shut and he had to force it open, and that the CO in the vent was jumping around and sitting above the 100 ppm legal limit, spiking close to 300 at one point. Because of that, he says he had to legally condemn the furnace.



Then he went out to his truck, supposedly to call his sales team, came back with two replacement quotes. When I asked what actually caused the problem, all he said was 'the heat exchanger ussually.' I asked about repairing it instead and he just said it's shot and they wouldn't touch it. He left with no paperwork, no tag or anything written on the furnace, nothing for us to sign, and they still haven't sent the actual quote. The furnace is only 10 years old, which feels like it should still have life in it, and with no real evidence the heat exchanger is bad I keep wondering if replacement is even necessery. Money is tight, we can't easily swing another inspection fee, and financing isn't a good option for me right now. If I do get a second opinon, what should I be asking to make sure it's legit?


That whole visit reads like a sales call, not an inspection. First thing to know: there is no legal limit for CO in exhaust. Manufacturers generally want combustion readings under 100 ppm, maybe up to 200 on some models, but there is no law about what comes out of the vent. The fact that he invented a 'legal limit' and then 'legally condemned' the furnace is a big red flag. And a real condemnation comes with paperwork. They tag the unit, they give you something in writing, and there's a process. He left you with nothing, then came back from his truck with two replacement quotes. That's commission-driven selling, and I've seen it plenty of times in my own years around this stuff.

Here's what I'd do. Call a small independent company, ideally family owned, and get a second opinion. Do not tell them another company allready looked at it, just describe the symptoms. And do not let the first company back in your house. When the new tech comes, ask for a combustion analysis printout and, if they claim the heat exchanger is cracked, ask for pictures of the actual failure. Any legit tech can show you both. If he can't or won't, that tells you everythign. Also worth knowing: high CO readings without a cracked heat exchanger are often fixable. Adjusting gas pressure, cleaning the burners, or replacing a part can bring those numbers right down. A 10 year old furnace usually has plenty of life left, and 'the heat exchanger usually' is not a diagnosis, that's a guy guessing. On the money side, one inspection fee from an independent shop is alot cheaper than a replacement you might not need, so it may be the best few dollars you spend. And regardless of how this shakes out, make sure you've got a quality smoke and carbon monoxide detector in the house. Cheap insurance for peace of mind either way.

The questions to ask the new tech are simple: what are the combustion readings, can I see the printout, and can you show me any actual damage? A straight answer with paperwork behind it is what you're looking for.

The missing paperwork is the part that would keep me up at night. When my old furnace got red tagged years back, the tech stuck a tag right on the unit, walked me through what failed, and I signed something before he left. Took maybe ten extra minutes. This guy skipping all of that while juggling two quotes in his head says a lot. One thing I'd want to know if I were you: did you ever get a callback or that quote in writing? If they're dodging paperwork a week later, that tells you who you're dealing with before you even book the second opinion.

I keep seeing 'small independent, family owned' treated like an automatic guarentee of honesty, and I'd pump the brakes on that part. The worst quote I ever got came from a two-man shop run by a father and son, and they ran the same scare routine on my old system that this tech ran on yours. Small just means less overhead, it doesn't mean straight arrows behind the wheel. So yes, definately still get that second opinion, but I'd judge the new tech by how they answer the questions above, not by how many trucks are on the lettering of thier van.

No paperwork at all is a red flag for me, especially after a condemnation. When a furnace is shut down for safety, you should expect a written note explaining the reason, the readings or findings, and what was done to make it safe. Without that, you have nothing to show a second tech or your insurer. I would get a second opinion from an independent company before agreeing to a replacement, and ask them to show you the readings and the fault in person.

The forced-open gas valve part is what gets me. Anyone who's actually wrestled with a stuck valve knows that story doesn't hold water. If a valve is truly seizing, the move is to red tag it and swap it out, not muscle it open and stroll off with two quotes in your pocket. I watched a version of this play out on my dad's old furnace, tech swore the whole thing was shot and pushed replacement hard. Second opinion found dirty burners, the readings came right down after, and that unit kept running fine for ages. So don't take the first guy's word for it, get that independent look before you sign anything.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required