Spend the money on the drywall gun.
I picked up a Dewalt from HD for around $60. The drywall bit for a
normal drill was almost half that, looked like it might last one job if
I was lucky, and lacked the depth adjustment.
And don't run a drywall screw through your finger. It hurts.
Second this suggestion. It's like $5 for a bag of four I think and they
work very well in an ordinary cordless drill / driver after a minute of
practice. I sheetrocked my 20'x32' shop with them with no issues.
Yes, there is. I have seen two models, a fancy magnetic attachment that
seems a little prone to breaking down - runs for about $25CDN or an
inexpensive plain drywall bit for about $3CDN. I believe they are both
available at Home Depot, so there is a good chance they are available
pretty much everywhere.
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.