Carpentry

Can I use wood sealer that has been frozen on outdoor deck?

I have a can of Thompson's wood sealer for the deck which was frozen over the winter. Can the product still be used?

4 comments posted 13yrs

posted by Ali

4 comments posted 13yrs posted by Ali

What is the maximum length for 3/4 inch plywood shelving between support joists if the shelving plywood is 2 feet wide?

No further details provided

0 comments posted 13yrs

posted by Anonymous

0 comments posted 13yrs posted by Anonymous

joining wood to melanine , what screws should I use?

joining a 1 and one- half inch of wood to the edge of melamine, What kind of screw should I use?

0 comments posted 13yrs

posted by bdavi7749@aol.com

0 comments posted 13yrs posted by bdavi7749@aol.com

is it worth waterproofing pressure treated plywood

No further details provided

0 comments posted 13yrs

posted by Sancar

0 comments posted 13yrs posted by Sancar

I need help in building and attaching a storage shed with roof, to my home. I already have a concrete slab.

I had recently had a 150 gallon solar water heater added to my home the best for it was outside home. So now, I need hel...

0 comments posted 13yrs

posted by M. Park

0 comments posted 13yrs posted by M. Park

My couter top has scraches and some heat marks what can I do for it before moving out . .

The counter top is made of cream color play wood . Unknowingly I kept hot pan on it and it got some marks . Please help...

0 comments posted 13yrs

posted by Honiara

0 comments posted 13yrs posted by Honiara

How can I easily repair varnished cabinets where water has splashed on them?

My bathroom and kitchen cabinet doors have been damaged slightly by having had water splashed or dripped down on them....

0 comments posted 13yrs

posted by Lucydee

0 comments posted 13yrs posted by Lucydee

Baluster spacing in a closed stairwell.

Can I use a 6" baluster spacing instead of the 4" if the stairwell is closed on both sides? The balusters would be less...

0 comments posted 13yrs

posted by togaclad

0 comments posted 13yrs posted by togaclad

up grading a rockwell delta 46-111

does anyone know if the tail stock center on a rockwell delta 46-111 a #1MT or a #2 MT ? or what the spindle size is ?

0 comments posted 13yrs

posted by joe

0 comments posted 13yrs posted by joe

I need to support hip roof in order to replace deck and all posts.

I have an old house that has a concrete porch 4foot above ground. I need advice on what to use and how to support hip ro...

0 comments posted 13yrs

posted by CBuster

0 comments posted 13yrs posted by CBuster

how do i trim a quarter inch from the backsplash of a preformed laminate countertop?

No further details provided

0 comments posted 13yrs

posted by Michael

0 comments posted 13yrs posted by Michael

What is the maximum span of a 2x12 header with single cripplers and a second floor?

No further details provided

0 comments posted 13yrs

posted by Anonymous

0 comments posted 13yrs posted by Anonymous

what is the structural integrity of cedar posts?

I had contractors install 3, 4x4 inch cedar posts supporting the awning of my front porch. It developed some, what I be...

0 comments posted 14yrs

posted by Henry

0 comments posted 14yrs posted by Henry

weight capacity for a 1 inch thick by 2 or 3 feet long plywood

how much weight will a 1inch by 3 foot long piece of plywood hold. I would like to put 2 1/2 inch peices together to use...

2 comments posted 14yrs

posted by Anonymous

2 comments posted 14yrs posted by Anonymous

I need to support approx. 4,000 lbs on a shelf

I am installing two wine racks in a storage closet, and want them 15-18 inches off the floor so I can store boxes under...

0 comments posted 14yrs

posted by DHS in HOU

0 comments posted 14yrs posted by DHS in HOU