Mira mixer shower has stopped working. No idea which one.
When you turn it on water comes out fine but then it falls away to a trickle.
Any thoughts?
Mira mixer shower has stopped working. No idea which one.
When you turn it on water comes out fine but then it falls away to a trickle.
Any thoughts?
Airlock?
Try taking the shower head off the end of the hose and see what it does. If it spits at you it was an airlock and it will be OK.
Andy
If using bath tap shows no loss of water pressure, probably blocked in-line strainer on MIRA (fine mesh 'plug' on water inlets)
I installed 2 new showers as part of build, carefully keeping inlets covered ... but one would not work on hot ... found that a small piece of wall insulation was in the filter - must have been inside the supply pipe ...
MIRA web site allows download of pdf files for their product manuals if you are unsure how to disassemble.
It worked when he got there. Might have been a kink in the pipe frm the mixer bit to the shower had so he's going to sort out a new one.
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.