Have fitted 15mm service valves to all appliances - the remaining one is the bath ... as this is fed by 22mm ... can you get 22mm service valves.
House is done with Hep20, and they don't make 22mm ones.
Rick
Have fitted 15mm service valves to all appliances - the remaining one is the bath ... as this is fed by 22mm ... can you get 22mm service valves.
House is done with Hep20, and they don't make 22mm ones.
Rick
Compression lever ball valves?
.andy
To email, substitute .nospam with .gl
I used full-bore T handle ball valves with 22mm compression fittings, which I bought from RS Components. Not only are they easier to operate when sticking an arm into the space under the bath, but they don't have the restricted bore of service valves.
Colin Bignell
You can get speedfit 22mm service valves, I bought one nearly 4 years ago from Homebase (only place I could find them) and its still going strong.
Although not exactly a service valve, there is a 22mm lever operated ball valve in the Hep2O range, catalogue number HX22/22 which will do the job.
Alternatively 22mm x 22mm compression ended brass service valves are available from plumbers' merchants and are suitable for use with Hep2O pipe, remembering of course, to use support sleeves.
The Hepworth Plumbing Products Team
-- Tel: +44 (0)1709 856 300 |Hepworth Plumbing Products Fax: +44 (0)1709 856 301 |Edlington Lane, Edlington Email: snipped-for-privacy@hepworthplumbing.co.uk |Doncaster, UK
are these full bore ? I don't want to throttle flow having gone to trouble of plumbing in 22mm.
Rick
Does it have to be a Hep20 valve? You can use a compression fitting valves (and other components) with Hep2O.
The HX22/22 is a full bore lever action ball valve with a 22mm Hep2O socket at each end. Details at
-- Tel: +44 (0)1709 856 300 |Hepworth Plumbing Products Fax: +44 (0)1709 856 301 |Edlington Lane, Edlington Email: snipped-for-privacy@hepworthplumbing.co.uk |Doncaster, UK
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.