Woodworking Forum

51629 Threads Posts
to

Closet Cabinets

My wife wants me to redo our 10x15 master bedroom closet. Instead of buying those closet kits from HD we have decided t...
15 comments posted 22yrs
posted by mikew
15 comments posted 22yrs posted by mikew

joiner fence aligmment Delta DJ-20

My fence touches the outfeed table near the blade and rides on the table as I move it back and forth. I am wondering if...
8 comments posted 22yrs
posted by jmmb
8 comments posted 22yrs posted by jmmb

Baltic Birch At MDF Prices

Well, almost. Just back from Home Depot. They had 4-units of "Classic Birch" sitting there where you'd have to trip ove...
20 comments posted 22yrs
posted by UnisawA100
20 comments posted 22yrs posted by UnisawA100

crosscut dado a dowel w/ TS, safely

With my TS, I need to make some crosscut 1" wide dados in a 1" diam dowel, about 6" long. The dados will be about 3/8"...
10 comments posted 22yrs
posted by no_spam
10 comments posted 22yrs posted by no_spam

Biscuit Joinery Question

Hello all, I am making a simple set of shelves out of 3/4" plywood with the shelves attached to the sides with biscuits...
30 comments posted 22yrs
posted by ronnie
30 comments posted 22yrs posted by ronnie

To minimize rust

on tools such as the table saw etc, has anyone tried this magnetic sheet = material? Any outstanding advantages over ju...
19 comments posted 22yrs
posted by wywywywywy
19 comments posted 22yrs posted by wywywywywy

Reading Cedar Planter Box Dimensions?

I've been asked by a friend to build a planter box made with Northern White Cedar. I was given dimensions of the box as...
4 comments posted 22yrs
posted by dejolaNOSPAM
4 comments posted 22yrs posted by dejolaNOSPAM

Fastening picture frame miters together

After getting a mat cutter, I can do my own framing. One problem area is getting the miters together. I glue the joints...
26 comments posted 22yrs
posted by nospam
26 comments posted 22yrs posted by nospam

Math help please, computing an arc and radius.

I'm trying to put a _very_ subtle curve on the bottom of some table aprons. I've placed some nails in the apron templat...
21 comments posted 22yrs
posted by mbaglio
21 comments posted 22yrs posted by mbaglio

Blooming

Please forgive me if I'm on the wrong Newsgroup with this question. After polishing my oak dining room table it still l...
11 comments posted 22yrs
posted by bill6dod6
11 comments posted 22yrs posted by bill6dod6

Shimming Unisaw extension table

SWMBO finally let me have my Unisaw (30" Biesemeyer, left-tilt, WAHOO!) When I got it unpacked, main table was out .027...
6 comments posted 22yrs
posted by nosp
6 comments posted 22yrs posted by nosp

Forstner bits

I have alot of dull bits. Can they be sharpend? If so how? Do they make carbide bits?
4 comments posted 22yrs
posted by woodhead69
4 comments posted 22yrs posted by woodhead69

KERFING WITH A POWER SAW

http://www.diynet.com/diy/tl_saws/article/0,2037,DIY_14394_2270528,00.html JOAT We will never have great leaders as lon...
0 comments posted 22yrs
posted by Jakofalltrades
0 comments posted 22yrs posted by Jakofalltrades

Observations: Performax 22-44 Plus

Just purchased a Performax 22-44 Plus from www.amazon.com approx. three weeks ago. Figured I'd post my experiences with...
3 comments posted 22yrs
posted by grendelrocks
3 comments posted 22yrs posted by grendelrocks

INSPIRATION - NO-WELD SPIRAL STAIRCASE

http://www.library.yale.edu/~lso/drama/ftdgrif.html Another side-effect of one of my searches. JOAT We will never have...
0 comments posted 22yrs
posted by Jakofalltrades
0 comments posted 22yrs posted by Jakofalltrades