Woodworking Forum

  1. Home
  2. Woodworking Forum
51629 Threads Posts
to

Worth reading in Woodworking Forum

tinting / dyeing epoxy

I'm looking to dye epoxy opaque white to fill in some small dings in a current project made of melamine. Does anyone ha...
4 comments posted 20yrs
posted by invalid
4 comments posted 20yrs posted by invalid

Is finishing drawers WITHOUT final fit-up OK?

I finished making eight 8-7/8" x 19" x 17"D drawers all of 3/4", 1/2", and 1/4" birch ply. I am gonna finish all but th...
10 comments posted 20yrs
posted by bent
10 comments posted 20yrs posted by bent

Working with Plywood

I made part of my box for the in-wall stereo cabinet last night. First problem is that the plywood was bowed. These sta...
14 comments posted 20yrs
posted by Fake
14 comments posted 20yrs posted by Fake

dovetailed drawers

I recently ran across a "rule of thumb" for orienting grain on drawer components. It was something like" inside of draw...
14 comments posted 20yrs
posted by dfghhthrthh
14 comments posted 20yrs posted by dfghhthrthh

Staining Unfinished Cabinets

I have stained a couple of doors and a couple of handrails with good results, but that is the extent of my experience....
8 comments posted 20yrs
posted by DaileyJohn.20.decij
8 comments posted 20yrs posted by DaileyJohn.20.decij

Worktop router bits. Cheap or expensive ones?

Is it worth buying the cheaper router bits if I am cutting just one joint with them? Am thinking of picking some cheap...
14 comments posted 20yrs
posted by Cordless.Crazy.22tgc5
14 comments posted 20yrs posted by Cordless.Crazy.22tgc5

Delta Unisaw/cabinet saw

Does any one know what the differences are between the Delta Unisaw and the Delta Industrial Cabinet saw?
26 comments posted 20yrs
posted by claypen
26 comments posted 20yrs posted by claypen

This End Up Furniture- question about assembly

Hello, I have a large sofa from This End Up furniture that I bought several years ago. I want to get rid of it but can...
12 comments posted 20yrs
posted by computerstuff2
12 comments posted 20yrs posted by computerstuff2

Using rustoleum as a wood base

Need to cover some old finished wood and have some left over rustoleum oil based primer. Is this recommendable for wood...
2 comments posted 20yrs
posted by johnnymac4254
2 comments posted 20yrs posted by johnnymac4254

Working on a Big Ash table (w/pics)

Hello everyone, This week I started on making a new kitchen table for myself. I have a three week pause as I wait for g...
3 comments posted 20yrs
posted by davefred2001
3 comments posted 20yrs posted by davefred2001

Stopping my table saw?

Hi, I have to cut a lot of boards of yellow birch (1'' thick) with my table saw (120V with 1.5 HP motor). Between each...
7 comments posted 20yrs
posted by aaaa
7 comments posted 20yrs posted by aaaa

Conduit - PVC or EMT

Conduit and boxes . . . EMT and metal boxes? PVC conduit and PVC boxes? PVC conduit & metal boxes? Will be covering all...
18 comments posted 20yrs
posted by no_spam_4_me
18 comments posted 20yrs posted by no_spam_4_me

Spalted wood stain

Does anyone know if it's possible to eliminate the stain from spalting? I'm working with some very slightly spalted qui...
4 comments posted 20yrs
posted by cdo
4 comments posted 20yrs posted by cdo

Any reason to avoid the Craftsman 14" band saw?

Haven't heard much about Craftsman's newer band saws. Their newer table saws got pretty good reviews. I'm pretty sure t...
8 comments posted 20yrs
posted by legend65
8 comments posted 20yrs posted by legend65