made a zero clearance insert of some birch type ply
what is a good long lasting finish that will be slippery
thought of applying some poly but not sure how well that wears
tung oil was another thought
the height is right so want to avoid anything thick
It's not a fine piece of furniture. Just apply some paste wax and polish dry.
Or spray the insert along with the TS top with TopKote.
Or make another out of melamine. ;-)
It's not rocket surgery. It doesn't have to be slippery. I've had the same MDF and raw plywood inserts for years and haven't had the slightest concern about how slick they are. Don't over think it, just make $h!t.
Bingo! We have a winner.
haha yeah i ended up using some tung oil as the ply was very dry and had some splinter potential
have let it set but need to see how the oil soaked in
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.