Any suggestions on how to resurface rough concrete that has been exposed for
7 years?Would love to have a smooth finish on the shop floor.
Thanks, Steve
Any suggestions on how to resurface rough concrete that has been exposed for
7 years?Would love to have a smooth finish on the shop floor.
Thanks, Steve
either skim coat with a smooth sticky mud or grind back down.
"bridger" wrote in news:1123305635.776995.302950 @o13g2000cwo.googlegroups.com:
If you're grinding, take the time to cover things like doorways (if not an isolated building) and take all your tools out! Concrete dust gets EVERYWHERE. We had some drain work done in a concrete basement floor and what was clean the day before was covered with dust the next day.
Puckdropper
I think Quickcrete has a product that will go on over the floor and smooth it out. At least they have been advertising it.
RonT
They make surface leveler just for that purpose, check your local hardware store or construction store.
Jon
Lay some sleepers and then tongue & groove ply. You'll love a wood floor in the shop even more than smooth concrete.
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.