Latest threads in UK Do-It-Yourself Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
[OT] Iomega HMNHD Spyware?
Pulled the power on my Iomega Home Media Network Hard Drive last night as it and the Raspberry had left redundant SMB sessions. Checking my email this morning I find one from " " telling me that the...
8
|
9 years ago
|
8 | |
|
|
circular saw armature resistance
I have just stripped the 1kW motor from a Black and Decker 10" circular saw I inherited. It was running erratic with the symptom indicating the brushes were making poor contact. Sure enough the...
53
|
9 years ago
|
53 | |
|
|
Brother 9020 printer report
The slave came this weekend and after I had wall mounted the new Brother 9020 printer on an old AVF CRT TV swinging bracket( he claimed his back hurt and he couldn't lift anything) he began the...
2
|
9 years ago
|
2 | |
|
|
Repairing a light fitting
A plastic 12v light fitting has cracked. I can repair it with a suitable adhesive, but it needs to be something that won't mind getting quite hot. How will epoxy resin fare? Thanks, Daniele
6
|
9 years ago
|
6 | |
|
|
Best way to finish wall surface after foam-fill
Just finished replacing handbasin waste with pvc pipe. What is the best way to finish off after that foam-fill? Would mortar take to the foam? Silicon over the lot is easy (and waterproof of course)...
8
|
9 years ago
|
8 | |
|
|
"Danish oil" vs "Wood finishing oil"
What is the difference between Mylands "Danish oil" and "Wood finishing oil"? Are these useful names, or just brand names? We have a kitchen counter (iroko) and a set of doors (oak) thatt both need...
2
|
9 years ago
|
2 | |
|
|
Glue for plastic oxygen pipe
I need to modify some medical oxygen plastic pipes, just like the pipe used for fish tank air pumps. The similar plastic ends need to be glued in place. What would be a suitable glue please?
26
|
9 years ago
|
26 | |
|
|
Sunday Opening
I had thought that shops were allowed to open for six hours on a Sunday. Having just visited the local Toolstation, I noticed they advertise (in the shop - which brought it to my attention - and...
27
|
9 years ago
|
27 | |
|
|
Extending Uprights
I'm making some free standing heavy duty shelving kits at the mo for a proj ect where spending money would be against the people's religion. Have just been given a bunch of wood for uprights that's a...
12
|
9 years ago
|
12 | |
|
|
One for Search engine experts
What does "E-Cut" stand for with multifunction tool blades?
6
|
9 years ago
|
6 | |
|
|
OSB grades and prices
As far as I gather, OSB2 is for internal non lead-bearing use and OSB2 is for external and/or load-bearing use - correct? T&P list prices are almost never lower than the sheds, but I notice...
2
|
9 years ago
|
2 | |
|
|
Oil tank leak
Does anyone have any experience of remedying an oil drip on the pipework of a heating oil tank? I've got this small but persistent drip, I think from one of the joints around the sight gauge. The tank...
36
|
9 years ago
|
36 | |
|
|
Fastening to MDF
I have some hifi speakers, where the speaker units are surface mounted to MDF, and a couple of the crews no longer grip. I know I could twist the unit a few degrees and use fresh wood, but I'd like to...
14
|
9 years ago
|
14 | |
|
|
Extra bit on bookcase
I had some photos spare, and figured the section on making the dentil moulding could do with better/more explanation, so did this: Making equally spaced cuts - DIYWiki
3
|
9 years ago
|
3 | |
|
|
How to support a light roof for a shelter
Picture from link. I have a 6 foot high fence and the space between the 2 posts is 6 feet, I would like to create a light roof probably using clear corrugated perspex stuff. It would be easy to put in...
4
|
9 years ago
|
4 |