Hello,
I'm wanting a bathroom lock from toolstation.com
they sell them as either 64mm or 76mm.
Is that the depth of the lock.
How do I know which one I want as the lock I am replacing is 70mm !!!!
is it something to do with the postion of the holes from the edge of the door.
in which case this is 54mm to the centre of the holes.
Any help, as always, would be truly appreciated
If you're trying to replace an existing mortise lock with a like-for-like equivalent (as you are), I wouldn't bother with looking for it on-line. I've tried this before and failed - not only is there the position of the door-handle hole to contend with, but all the other dimensions - width/depth/length/thickness - all of which vary in different locks. I think there have been attempts to standardise sizes, but in the real world there are loads of them.
David
As the other poster said, forget online. Forget B&Q, remove your lock and take it to a good locksmith - if it's available he should be able to supply it.
Paul
Have something to add? Share your thoughts — no account required.
Ask the community — no account required