I have a double-skinned dome about 750 x 750 and want to minimise the heat gain through it but keep ligh gain as high as possible.
The inner skin is slight curved.
Is there a film or spray I could successfully apply myself?
Thanks
I have a double-skinned dome about 750 x 750 and want to minimise the heat gain through it but keep ligh gain as high as possible.
The inner skin is slight curved.
Is there a film or spray I could successfully apply myself?
Thanks
white paint reflects away more heat than those silver grey coatings, and a very thin layr of white will allow light in. Whitewash is traditionally used for this.
NT
In article , snipped-for-privacy@care2.com Sun, 6 Aug 2006 15:16:26 writes
Can I use watered-down emulsion paint - and will it come off easily if I make a mess of it?
probably but not necessarily, and no. The point of limewash is it comes off easily if need be. Its also cheaper.
NT
Have something to add? Share your thoughts — no account required.
Ask the community — no account required