Paint help for kitchen.

plaster needn't be sealed

Imagine painting new paint on top of stripper soaked plaster. No. Scrape, sand or skim if necessary, but normally there's no need to remove anything that's stuck.

Emulsion. Satin is more cleanable than matt, and decent stuff more cleanable than cheapskate.

Satin's better

PVAing the plaster is a fashion without need. Paint onto bare dry plaster results in the liquid in the paint being sucked into the plaster, leaving it short of glue, hence the peeling. Solutions: a) 50/50 diluted pisscoat first b) paint the plaster with water, wait 5 minutes then paint as normal. c) dilute PVA onto plaster first. Too much and you get slicks paint won't stick to. I prefer B, it's quicker & stronger. C I'd avoid.

NT

so b) is quicker and stronger than a)?

I've always used a), never had the paint fall off.

Yes. The watercoat is extremely fast to do, nothing like a coat of paint wh ere you need to take some care. So you get a full strength coat in a few mi nutes more than it takes to do the pisscoat. With a pisscoat much of the di luted glue soaks into the plaster, weakening the paint. With B it doesn't.

NT

Yes. The watercoat is extremely fast to do, nothing like a coat of paint where you need to take some care. So you get a full strength coat in a few minutes more than it takes to do the pisscoat. With a pisscoat much of the diluted glue soaks into the plaster, weakening the paint. With B it doesn't.

Well that's every professional painter and decorator I have ever seen at work doing it wrong then.

It's not wrong to use a pisscoat, just quicker to use water.

NT

Is that the sound of a six letter word I can hear stomping into view?

Begins with a W.

No, it's the sound of you being thick and childish again.

Wanker.

You are indeed sir.