Miele G645SC Dishwasher Problem

RedOnRed · 2006-04-23T10:08:21+00:00

I got a Miele G645SC dishwasher about 10 days ago and it's already packed up. Not really what I expected from Miele, or from any manufacturer for that matter.The machine suddenly stops with the inlet/drain light flashing.I've checked all the filters and the pump...which are very clean of course as only 10 days old! Checked the drain hose doesn't have a kink. Checked the inlet hose...the machine is filling with water. Checked the spinning water blades aren't obstructed and i've also unplugged it for 30 minutes as Miele suggested.If anyone can suggest any other fixes it would be most appreciated as i've just got used to life not washing dishes for the first time. :-)Other then that, the over-priced, over-rated pile of junk will be going back.

Apr 23, 2006 Last reply: 1 year ago 41 Replies

Rate this thread:

The Natural Philosopher 1 year ago

That's where a 3D printer is handy. Make a pro looking plastic plate instead.

Vote

alan_m 1 year ago

On most microwaves on the bottom panel there is a section that can be easily cut out with a pair of tin snips. This is inbuilt into the design so that the turntable motor can easily be replaced. The bit that is removed can be rotated slightly and re-fixed with a screw.

formatting link

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required